Give your vehicle a wider track width and increased stability with Rough Country's Wheel Spacers. These ultra-durable spacers are constructed for a long lifespan of heavy-duty performance. Rough Country’s .25-Inch Wheel Spacers are designed for vehicles using a 6x5.5 or 6x135 bolt pattern.

Features

• Allows 07-up GM 1500 models with a Rough Country 3.5-inch or 4.75-inch lift kit to run their factory wheels.\ Spacers are corrosion resistant.

Note: Fits 6 x 5.5" bolt pattern. Fits 6 x 135mm bolt pattern. Sold in pairs.

Installation Time: 1 hour

Installation Instructions (PDF)

Run larger tires on your with Rough Country's 2-inch Wheel Spacers. This 2-inch spacer helps offset the wheel from your truck's suspension, allowing use of a wider tire and giving a meaner overall look. This 8-lug spacer fits a 8X6.5 Bolt Pattern supporting 14mmx1.5 studs. Made of 6061-T6 Aluminum, it is also corrosion resistant.

Features

• Center Bore: 4.8"\ Thread Pitch: M14x1.5\ Spaces wheel 2" allowing use of wider tires.\ Made from 6061-T6 Aluminum.\ Spacers are corrosion resistant.\ Studs are preinstalled.

Note: Does NOT fit dually models. Fits 8 x 6.5" bolt pattern. Sold in pairs.

Installation Instructions (PDF)

Ready to take your ride to the next level? Our 5" suspension lift kit is designed for ultimate off-road performance delivering a seamless ride on highways and exceptional control on rough terrainΓÇöno adjustments needed.Increased Ground Clearance: Gain the ability to clear obstacles with ease, enhancing your off-road capabilities.Maintains Factory Steering Angles: Enjoy smooth handling and precise control no matter where the road takes you.Works with Factory 17" and 20" Wheels: Keep your wheels, save on upgrades, and enjoy a hassle-free installation.Control Arm Drop Brackets: Experience improved ride quality and drivability with a reduced control arm angle, making your off-road adventures smoother.Track Bar Bracket: Keep the front axle centered for optimal stability, preventing steering issues.Fabricated Blocks: Durable, stronger, and longer-lasting than cast blocks, providing reliable performance for the long haul.Configurable Shock Options: Customize your ride with your choice of nitrogen-charged N3, V2 Monotube, or M1 Monotube shocksΓÇötailored to your preferences!This kit is engineered to perfection, with our Control Arm Drop Bracket System that improves driveline geometry by eliminating the steep angles typically found on 5" and larger kits. This solution, combined with our heavy-duty drop brackets, ensures a smoother ride and better caster angle for improved drivability. Whether you're hitting the trails or cruising on the highway, this kit gives you the control and comfort you need.

Features

• Increased Ground Clearance: Provides better off-road capability, helping you clear obstacles with ease.\ Maintains Factory Steering Angles: Ensures smooth handling and precise control while driving.\ Works with Factory 17" and 20" Wheels: No need to upgrade your wheels for compatibility, making installation a breeze.\ Control Arm Drop Brackets: Reduces control arm angle, improving ride quality and drivability for a smoother off-road experience.\ Track Bar Bracket: Keeps the front axle properly centered, preventing steering issues and ensuring stability.\ Fabricated Blocks: Stronger and more durable than cast blocks, providing a longer lifespan for dependable performance.\ Configurable Shock Options: Choose from our nitrogen-charged N3, V2 Monotube, or M1 Monotube shocksΓÇöthe power to customize your ride is in your hands!

Note: Requires minor drilling. Does NOT fit dually models. Does NOT fit Power Wagon models as they are equipped with electronic sway bar disconnects. On vehicles equipped with a two-piece driveshaft & carrier bearing as on the Mega Cab, there is the potential for take-off vibration, depending on the severity, this can be corrected by shimming down the carrier bearing.

Installation Instructions (PDF)

Ready to take your ride to the next level? Our 5" suspension lift kit is designed for ultimate off-road performance delivering a seamless ride on highways and exceptional control on rough terrainΓÇöno adjustments needed.Increased Ground Clearance: Gain the ability to clear obstacles with ease, enhancing your off-road capabilities.Maintains Factory Steering Angles: Enjoy smooth handling and precise control no matter where the road takes you.Works with Factory 17" and 20" Wheels: Keep your wheels, save on upgrades, and enjoy a hassle-free installation.Control Arm Drop Brackets: Experience improved ride quality and drivability with a reduced control arm angle, making your off-road adventures smoother.Track Bar Bracket: Keep the front axle centered for optimal stability, preventing steering issues.Fabricated Blocks: Durable, stronger, and longer-lasting than cast blocks, providing reliable performance for the long haul.Configurable Shock Options: Customize your ride with your choice of nitrogen-charged N3, V2 Monotube, or M1 Monotube shocksΓÇötailored to your preferences!This kit is engineered to perfection, with our Control Arm Drop Bracket System that improves driveline geometry by eliminating the steep angles typically found on 5" and larger kits. This solution, combined with our heavy-duty drop brackets, ensures a smoother ride and better caster angle for improved drivability. Whether you're hitting the trails or cruising on the highway, this kit gives you the control and comfort you need.

Features

• Increased Ground Clearance: Provides better off-road capability, helping you clear obstacles with ease.\ Maintains Factory Steering Angles: Ensures smooth handling and precise control while driving.\ Works with Factory 17" and 20" Wheels: No need to upgrade your wheels for compatibility, making installation a breeze.\ Control Arm Drop Brackets: Reduces control arm angle, improving ride quality and drivability for a smoother off-road experience.\ Track Bar Bracket: Keeps the front axle properly centered, preventing steering issues and ensuring stability.\ Fabricated Blocks: Stronger and more durable than cast blocks, providing a longer lifespan for dependable performance.\ Configurable Shock Options: Choose from our nitrogen-charged N3, V2 Monotube, or M1 Monotube shocksΓÇöthe power to customize your ride is in your hands!

Note: Requires minor drilling. Does NOT fit dually models. Does NOT fit Power Wagon models as they are equipped with electronic sway bar disconnects. On vehicles equipped with a two-piece driveshaft & carrier bearing as on the Mega Cab, there is the potential for take-off vibration, depending on the severity, this can be corrected by shimming down the carrier bearing.

Installation Instructions (PDF)

Put the finishing touch on your Dodge Ram 1500 with Rough Country's 2.5-inch Leveling Lift Kit, the perfect way to achieve a semi-level stance ideal for towing. Designed specifically for fourth-generation Ram 1500 trucks, this kit raises the front and rear while maintaining a 1-inch rear rake favored by towing pros for a balanced, level look when hauling heavy loads.Level Up Your Truck: Keep the factory rear rake preferred for towing while achieving a sleek, semi-level appearance that balances style and performance.Durable and Ready: This kit includes heavy-duty front and rear spacers built to handle tough conditions. It installs easily with a bolt-on design that requires no cutting or special tools, making installation quick and hassle-free.Preserves Factory Ride Quality: Re-uses your factory coil springs to keep the smooth, comfortable ride you expect for everyday driving.Additional Tire Clearance: Fits up to 33x12.50 tires, giving your Ram a more commanding stance on and off the road.Available with N3 or M1 Struts and Shocks: Choose between rugged N3 or smooth M1 suspension components tailored to your driving style and needs.Peace of Mind Included: Rough Country backs this kit with a Limited Lifetime Replacement Guarantee, ensuring your suspension is ready for whatever comes next.

Features

• Effortless Bolt-On Installation: Installs quickly with no cutting, drilling, or special tools required for a hassle-free upgrade.\ Enhanced Ground Clearance: Provides extra height to confidently tackle off-road trails and everyday obstacles.\ Preserves Smooth Factory Ride: Maintains your vehicle's original comfortable and controlled driving experience on and off the road.\ Optimized Rear Rake: Leaves a 1-inch rear rake to improve towing stability and cargo handling without compromising stance.\ Available with N3 or M1 Struts and Shocks: Choose between rugged N3 or smooth M1 suspension components tailored to your driving needs.

Note: Does NOT fit models with 4-Corner Air-Suspension found standard on Rebel and Limited models. This package is an available upgrade across multiple sub-models. For a visual to confirm if your vehicle is equipped, click here. Does NOT fit Warlock models as they are equipped with a 1-inch factory lift.

Installation Instructions (PDF)

Lift, level, and smooth out your ride with Rough Country's new and improved 2.5-inch RAM 2500/3500 Leveling Kit. Engineered to fit RAM trucks equipped with front radius arm suspension setups, this easy-to-install kit gives a big boost at an unbelievable price!Rough Country's durable coil spring spacers have been expertly redesigned to match the factory geometry of your truck, including the angle of the coil mounts and position of the rubber isolator, which perfectly indexes both springs to eliminate any chance of coil bowing. This kit has also been upgraded to include shock extension brackets that allow you to reuse your factory shocks at the optimum angle for your new lifted truck.This kit also features a lightning fast, 100% bolt-on installation process that couldn't be easier! Includes Rough Country's Lifetime Replacement Warranty.

Features

• Easy bolt-on installation\ Maintains factory ride quality\ Levels the front with the rear of the vehicle

Note: Does NOT fit Power Wagon models Requires light drilling

Installation Instructions (PDF)

Lift, level, and smooth out your ride with Rough Country's new and improved 2.5-inch RAM 2500/3500 Leveling Kit. Engineered to fit RAM trucks equipped with front radius arm suspension setups, this easy-to-install kit gives a big boost at an unbelievable price!\ Rough Country's durable coil spring spacers have been expertly redesigned to match the factory geometry of your truck, including the angle of the coil mounts and position of the rubber isolator, which perfectly indexes both springs to eliminate any chance of coil bowing. This kit also includes a pair of front N3 Shock Absorbers for better ride quality both on and off-road. Rough CountryΓÇÖs N3 shocks are nitrogen charged, featuring 10-Stage Velocity Sensitive Valving for a smooth ride no matter what the terrain.\ This kit also features a lightning fast, 100% bolt-on installation process that couldn't be easier or less invasive to your new vehicle. Includes Rough Country's Lifetime Replacement Warranty.

Features

• Easy bolt-on installation\ Maintains factory ride quality\ Levels the front with the rear of the vehicle

Note: Does NOT fit Power Wagon models

Installation Instructions (PDF)

Keep your carpet in pristine condition with Rough Country's Floor Armor: Heavy Duty Floor Mats and Rear Cargo Liners. These eco-friendly, semi-flexible floor mats are made of an ultra-durable Polyethylene that offers a strong, rigid shape that's incredibly easy to clean.\ Where simple rubber floor mats fail, Rough Country's line of Floor Armor is guaranteed for life and will never crack, split, or break-down over time. The high-quality design extends the lifespan of your carpets and the raised-lip design ensures your interior will always be protected from mud, moisture, and more.\ These contoured floor mats are laser-measured for each make and model; designed to be a precise fit that grips the carpet and stays put. An aggressive looking textured surface gives your muddy shoes plenty of traction and looks great inside the vehicle.\ No matter what you track in, Rough Country Floor Armor is incredibly easy to clean. Just pop them out of the floorboards and rinse away the dirt! Includes Rough Country's Lifetime Replacement Warranty.

Features

• Quick and easy installation\ Meticulously engineered to fit each vehicle exactly right\ All weather protection against Snow, Mud, Sand, Salt Water and More!\ Resist extreme temperatures\ Protect against soda, coffee spills or accidents\ Spill Saver Lip (Prevents spills from reaching the carpet.)\ Textured surface keeps feet from slipping\ Eco-friendly, low density polyethylene provides full flexibility to ensure a lasting shape\ Easy to Clean and Maintain (Detachable from Vehicle)\ Limited Lifetime Warranty

Note: Fits Quad Cab Trucks Only

Installation Instructions (PDF)

Transform the stance of your fourth-generation Ram 1500 with Rough Country's 2.5-inch Leveling Kit for 2012-2018 models. Designed to eliminate the factory rake, this kit raises the front end to match the rear, delivering a clean, aggressive, and leveled look that enhances both appearance and functionality.Effortless Installation: With a simple bolt-on design, this kit installs quickly and easily with no cutting or drilling required, making it a hassle-free upgrade for your truck.More Ground Clearance: Gain additional ride height to clear obstacles more confidently and tackle uneven terrain with ease.Run Larger Tires: Enjoy the freedom to install up to 33-inch tires, giving your Ram a bold, commanding presence and improved off-road traction.Balanced Stance: Levels the front with the rear to eliminate the nose-down factory stance, creating a more streamlined and aggressive profile.Factory Ride Feel Maintained: Reuses your stock coil springs to preserve the smooth, comfortable ride quality you expect from your Ram.

Features

• Simple Bolt-On Installation: Installs quickly and easily with no cutting or modifications required, making it a hassle-free upgrade.\ Enhanced Ground Clearance: Gain extra ride height for improved obstacle clearance and better off-road capability.\ Front-to-Rear Leveling: Eliminates the factory rake by bringing the front end up to match the rear, giving your vehicle a more aggressive, balanced stance.\ Factory Ride Quality Preserved: Reuses your stock coil spring to maintain the comfortable, smooth ride you expect from your factory suspension.\ Clears Up to 33-Inch Tires: Provides the necessary lift to run larger 33-inch tires for a bolder look and improved off-road traction.

Note: Requires disassembling your strut to install. Does NOT fit Warlock models as they are equipped with a 1-inch factory lift. Does NOT fit models with 4-Corner Air-Suspension found standard on Rebel and Limited models. This package is an available upgrade across multiple sub-models. For a visual to confirm if your vehicle is equipped, click here.

Installation Time: 2-3 hours

Installation Instructions (PDF)

Compliment your RAM 2500's aggressive, good looks with Rough Country's new 5-inch Lift Kit with lifted coil springs. New model RAM Trucks come with a wealth of impressive features right from the factory. Rough Country's new 5-inch kit was engineered to retain these impressive factory specs while bumping up performance and durability where it's needed most. The result is a lifted beast with a mean profile and lush ride-quality that'll make other RAM owners wonder where you got yours from!Rough CountryΓÇÖs 5-inch Lift Kit is designed for Dodge RAMΓÇÖs equipped with either factory rear coils or factory rear air ride suspension. On Air Ride models, this kit uses a rear air bag spacer that works with the factory air bag to provide rear lift. This kit also features a Rear Sensor Arm Relocation Bracket that can modify how the sensor link speaks to the computer to determine what the ride height is. This allows you to adjust the amount of rear height up to 1-inch higher than the front by way of multiple mounting points spaced by 1/4-inch. Pick the mounting point you want for the rear ride height you prefer.When changing a vehicle's suspension, the key to preserving ride quality is in keeping the geometry of all suspension components as close to their factory angles as possible. Rough Country's new 5-inch Suspension kit features a set of ultra-durable Radius Arms, precision fit to bolt right into the factory mounts for an easier install and a more factory-like angle. These beefy, upgraded Radius Arms also feature a durable, durable rubber bushings for maximum vibration absorption. This kit also includes a set of front, lifted coil springs for unparalleled ride quality from your lifted Dodge Ram.

Features

• Increased ground clearance\ Track bar bracket keeps the front axle properly centered.\ Fits both rear coil spring and rear air ride suspension models!\ Radius Arms offer a more factory-like angle and feature a durable, durable rubber Bushing for maximum vibration absorption.\ Rear ride height arm brackets let you adjust the rear ride height, up to 1-inch higher than the front - Air Ride models ONLY\ Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use.

Note: Does NOT fit "Power Wagon" models. Does NOT fit gas engine models. Requires drilling and cutting. On vehicles equipped with a two piece driveshaft & carrier bearing as on the Mega Cab, there is the potential for take off vibration, depending on the severity, this can be corrected with shimming down the carrier bearing.

Installation Instructions (PDF)

Compliment your RAM 2500's aggressive, good looks with Rough Country's new 5-inch Lift Kit with lifted coil springs. New model RAM Trucks come with a wealth of impressive features right from the factory. Rough Country's new 5-inch kit was engineered to retain these impressive factory specs while bumping up performance and durability where it's needed most. The result is a lifted beast with a mean profile and lush ride-quality that'll make other RAM owners wonder where you got yours from!Rough CountryΓÇÖs 5-inch Lift Kit is designed for Dodge RAMΓÇÖs equipped with either factory rear coils or factory rear air ride suspension. On Air Ride models, this kit uses a rear air bag spacer that works with the factory air bag to provide rear lift. This kit also features a Rear Sensor Arm Relocation Bracket that can modify how the sensor link speaks to the computer to determine what the ride height is. This allows you to adjust the amount of rear height up to 1-inch higher than the front by way of multiple mounting points spaced by 1/4-inch. Pick the mounting point you want for the rear ride height you prefer.When changing a vehicle's suspension, the key to preserving ride quality is in keeping the geometry of all suspension components as close to their factory angles as possible. Rough Country's new 5-inch Suspension kit features a set of ultra-durable Radius Arms, precision fit to bolt right into the factory mounts for an easier install and a more factory-like angle. These beefy, upgraded Radius Arms also feature a durable, durable rubber bushings for maximum vibration absorption. This kit also includes a set of front, lifted coil springs for unparalleled ride quality from your lifted Dodge Ram.

Features

• Increased ground clearance\ Track bar bracket keeps the front axle properly centered.\ Fits both rear coil spring and rear air ride suspension models!\ Radius Arms offer a more factory-like angle and feature a durable, durable rubber Bushing for maximum vibration absorption.\ Rear ride height arm brackets let you adjust the rear ride height, up to 1-inch higher than the front - Air Ride models ONLY\ Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use.

Note: Does NOT fit "Power Wagon" models. Does NOT fit diesel engine models. Requires drilling and cutting. On vehicles equipped with a two piece driveshaft & carrier bearing as on the Mega Cab, there is the potential for take off vibration, depending on the severity, this can be corrected with shimming down the carrier bearing.

Installation Instructions (PDF)

Put the finishing touch on your Dodge Ram 1500 with Rough Country's 2.5-inch Leveling Lift Kit, the perfect way to achieve a semi-level stance ideal for towing. Designed specifically for fourth-generation Ram 1500 trucks, this kit raises the front and rear while maintaining a 1-inch rear rake favored by towing pros for a balanced, level look when hauling heavy loads.Level Up Your Truck: Keep the factory rear rake preferred for towing while achieving a sleek, semi-level appearance that balances style and performance.Durable and Ready: This kit includes heavy-duty front and rear spacers built to handle tough conditions. It installs easily with a bolt-on design that requires no cutting or special tools, making installation quick and hassle-free.Preserves Factory Ride Quality: Re-uses your factory coil springs to keep the smooth, comfortable ride you expect for everyday driving.Additional Tire Clearance: Fits up to 33x12.50 tires, giving your Ram a more commanding stance on and off the road.Available with N3 or M1 Struts and Shocks: Choose between rugged N3 or smooth M1 suspension components tailored to your driving style and needs.Peace of Mind Included: Rough Country backs this kit with a Limited Lifetime Replacement Guarantee, ensuring your suspension is ready for whatever comes next.

Features

• Effortless Bolt-On Installation: Installs quickly with no cutting, drilling, or special tools required for a hassle-free upgrade.\ Enhanced Ground Clearance: Provides extra height to confidently tackle off-road trails and everyday obstacles.\ Preserves Smooth Factory Ride: Maintains your vehicle's original comfortable and controlled driving experience on and off the road.\ Optimized Rear Rake: Leaves a 1-inch rear rake to improve towing stability and cargo handling without compromising stance.\ Available with N3 or M1 Struts and Shocks: Choose between rugged N3 or smooth M1 suspension components tailored to your driving needs.

Note: Optional replacement struts ONLY give 2-inches of front lift. Due to variances in motor weight our replacement struts do NOT fit models equipped with a 3.6L Pentastar V6 engine. Does NOT fit models with 4-Corner Air-Suspension found standard on Rebel and Limited models. This package is an available upgrade across multiple sub-models. For a visual to confirm if your vehicle is equipped, click here. Does NOT fit Warlock models as they are equipped with a 1-inch factory lift.

Installation Instructions (PDF)

Compliment your RAM 2500's aggressive, good looks with Rough Country's 5-inch Lift Kit. New model RAM Trucks come with a wealth of impressive features right from the factory. Rough Country's 5-inch kit was engineered to retain these impressive factory specs while bumping up performance and durability where it's needed most. The result is a lifted beast with a mean profile and lush ride-quality that'll make other RAM owners wonder where you got yours from!Rough CountryΓÇÖs 5-inch Lift Kit is designed for Dodge RAMΓÇÖs equipped with either factory rear coils or factory rear air ride suspension. On Air Ride models, this kit uses a rear air bag spacer that works with the factory air bag to provide rear lift. This kit also features a Rear Sensor Arm Relocation Bracket that can modify how the sensor link speaks to the computer to determine what the ride height is. This allows you to adjust the amount of rear height up to 1-inch higher than the front by way of multiple mounting points spaced by 1/4-inch. Pick the mounting point you want for the rear ride height you prefer.When changing a vehicle's suspension, the key to preserving ride quality is in keeping the geometry of all suspension components as close to their factory angles as possible. Rough Country's 5-inch Suspension kit features a set of Radius Arm Drop brackets allowing you to retain the beefy factory arms while keeping everything at optimum angles. This kit also features a set of front, lifted coil springs, anti-wrap rear blocks and N3 Shocks for a fantastic blend of smooth highway ride and awesome off-road performance.

Features

• Increased ground clearance\ Maintains factory progressive rate coil springs\ Track bar bracket keeps the front axle properly centered.\ Fits both rear coil spring and rear air ride suspension models!\ Rear ride height arm brackets let you adjust the rear ride height, up to 1-inch higher than the front - Air Ride models ONLY\ Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use.

Note: Does NOT fit Gas engine models - please use SKU: 36420. Does NOT fit "Power Wagon" models. Requires drilling and cutting. On vehicles equipped with a two piece driveshaft & carrier bearing as on the Mega Cab, there is the potential for take off vibration, depending on the severity, this can be corrected with shimming down the carrier bearing.

Installation Instructions (PDF)

Compliment your RAM 2500's aggressive, good looks with Rough Country's 5-inch Lift Kit. New model RAM Trucks come with a wealth of impressive features right from the factory. Rough Country's 5-inch kit was engineered to retain these impressive factory specs while bumping up performance and durability where it's needed most. The result is a lifted beast with a mean profile and lush ride-quality that'll make other RAM owners wonder where you got yours from!Rough CountryΓÇÖs 5-inch Lift Kit is designed for Dodge RAMΓÇÖs equipped with either factory rear coils or factory rear air ride suspension. On Air Ride models, this kit uses a rear air bag spacer that works with the factory air bag to provide rear lift. This kit also features a Rear Sensor Arm Relocation Bracket that can modify how the sensor link speaks to the computer to determine what the ride height is. This allows you to adjust the amount of rear height up to 1-inch higher than the front by way of multiple mounting points spaced by 1/4-inch. Pick the mounting point you want for the rear ride height you prefer.When changing a vehicle's suspension, the key to preserving ride quality is in keeping the geometry of all suspension components as close to their factory angles as possible. Rough Country's 5-inch Suspension kit features a set of Radius Arm Drop brackets allowing you to retain the beefy factory arms while keeping everything at optimum angles. This kit also features a set of front, lifted coil springs, anti-wrap rear blocks and N2.0 Shocks for a fantastic blend of smooth highway ride and awesome off-road performance.

Features

• Increased ground clearance\ Maintains factory progressive rate coil springs\ Track bar bracket keeps the front axle properly centered.\ Fits both rear coil spring and rear air ride suspension models!\ Rear ride height arm brackets let you adjust the rear ride height, up to 1-inch higher than the front - Air Ride models ONLY\ Includes application valved N2.0 series shock absorbers which offer the best in balanced performance for on and off-road use.

Note: Does NOT fit Diesel engine models - please use SKU: 36520. Does NOT fit "Power Wagon" models. Requires drilling and cutting. On vehicles equipped with a two piece driveshaft & carrier bearing as on the Mega Cab, there is the potential for take off vibration, depending on the severity, this can be corrected with shimming down the carrier bearing.

Installation Instructions (PDF)

Compliment your RAM 2500's aggressive, good looks with Rough Country's 5-inch Lift Kit. New model RAM Trucks come with a wealth of impressive features right from the factory. Rough Country's 5-inch kit was engineered to retain these impressive factory specs while bumping up performance and durability where it's needed most. The result is a lifted beast with a mean profile and lush ride-quality that'll make other RAM owners wonder where you got yours from!Rough CountryΓÇÖs 5-inch Lift Kit is designed for Dodge RAMΓÇÖs equipped with either factory rear coils or factory rear air ride suspension. On Air Ride models, this kit uses a rear air bag spacer that works with the factory air bag to provide rear lift. This kit also features a Rear Sensor Arm Relocation Bracket that can modify how the sensor link speaks to the computer to determine what the ride height is. This allows you to adjust the amount of rear height up to 1-inch higher than the front by way of multiple mounting points spaced by 1/4-inch. Pick the mounting point you want for the rear ride height you prefer.When changing a vehicle's suspension, the key to preserving ride quality is in keeping the geometry of all suspension components as close to their factory angles as possible. Rough Country's 5-inch Suspension kit features a set of Radius Arm Drop brackets allowing you to retain the beefy factory arms while keeping everything at optimum angles. In a further effort to preserve the truck's factory ride, this kit retains the factory progressive rate coil spring -- designed by Dodge specifically for the weight and ride quality of these new model trucks. This kit also features a set of N3 Shocks for a fantastic blend of smooth highway ride and awesome off-road performance.

Features

• Increased ground clearance\ Maintains factory progressive rate coil springs\ Track bar bracket keeps the front axle properly centered.\ Fits both rear coil spring and rear air ride suspension models!\ Rear ride height arm brackets let you adjust the rear ride height, up to 1-inch higher than the front - Air Ride models ONLY\ Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use.

Note: Does NOT fit "Power Wagon" models. Requires drilling and cutting. On vehicles equipped with a two piece driveshaft & carrier bearing as on the Mega Cab, there is the potential for take off vibration, depending on the severity, this can be corrected with shimming down the carrier bearing. SKU: 1161.

Installation Time: 6-8 hours

Installation Instructions (PDF)

Keep your carpet in pristine condition with Rough Country's Floor Armor: Heavy Duty Floor Mats and Rear Cargo Liners. These eco-friendly, semi-flexible floor mats are made of an ultra-durable Polyethylene that offers a strong, rigid shape that's incredibly easy to clean.\ Where simple rubber floor mats fail, Rough Country's line of Floor Armor is guaranteed for life and will never crack, split, or break-down over time. The high-quality design extends the lifespan of your carpets and the raised-lip design ensures your interior will always be protected from mud, moisture, and more.\ These contoured floor mats are laser-measured for each make and model; designed to be a precise fit that grips the carpet and stays put. An aggressive looking textured surface gives your muddy shoes plenty of traction and looks great inside the vehicle.\ No matter what you track in, Rough Country Floor Armor is incredibly easy to clean. Just pop them out of the floorboards and rinse away the dirt! Includes Rough Country's Lifetime Replacement Warranty.

Features

• Quick and easy installation\ Meticulously engineered to fit each vehicle exactly right\ All weather protection against Snow, Mud, Sand, Salt Water and More!\ Resist extreme temperatures\ Protect against soda, coffee spills or accidents\ Spill Saver Lip (Prevents spills from reaching the carpet.)\ Textured surface keeps feet from slipping\ Eco-friendly, low density polyethylene provides full flexibility to ensure a lasting shape\ Easy to Clean and Maintain (Detachable from Vehicle)\ Limited Lifetime Warranty

Note: ONLY fits Quad cab models

Keep your carpet in pristine condition with Rough Country's Floor Armor: Heavy Duty Floor Mats and Rear Cargo Liners. These eco-friendly, semi-flexible floor mats are made of an ultra-durable Polyethylene that offers a strong, rigid shape that's incredibly easy to clean.\ Where simple rubber floor mats fail, Rough Country's line of Floor Armor is guaranteed for life and will never crack, split, or break-down over time. The high-quality design extends the lifespan of your carpets and the raised-lip design ensures your interior will always be protected from mud, moisture, and more.\ These contoured floor mats are laser-measured for each make and model; designed to be a precise fit that grips the carpet and stays put. An aggressive looking textured surface gives your muddy shoes plenty of traction and looks great inside the vehicle.\ No matter what you track in, Rough Country Floor Armor is incredibly easy to clean. Just pop them out of the floorboards and rinse away the dirt! Includes Rough Country's Lifetime Replacement Warranty.

Features

• Quick and easy installation\ Meticulously engineered to fit each vehicle exactly right\ All weather protection against Snow, Mud, Sand, Salt Water and More!\ Resist extreme temperatures\ Protect against soda, coffee spills or accidents\ Spill Saver Lip (Prevents spills from reaching the carpet.)\ Textured surface keeps feet from slipping\ Eco-friendly, low density polyethylene provides full flexibility to ensure a lasting shape\ Easy to Clean and Maintain (Detachable from Vehicle)\ Limited Lifetime Warranty

Note: ONLY fits Crew or Mega cab models

Rough Country's 3-Inch Bolt-On Kit delivers aggressive good looks, increased ground clearance, and an easy installation - all at an unbeatable value. Take your fourth-generation RAM 1500 to the next level with this premium lift kit, designed to enhance both on-road comfort and off-road capability. Increased Ground Clearance: Tackle rocky trails and rough terrain with confidence! This lift kit gives your RAM 1500 the extra height needed to clear obstacles effortlessly, improving both performance and protection. Front-to-Rear Leveling: Say goodbye to factory rake! This kit levels the front and rear of your truck, giving it a bold, aggressive stance that commands attention on and off the road. Premium Upper Control Arms: Equipped with forged aluminum upper control arms, this kit enhances strength and durability. These high-quality arms feature POM ball joints, providing a greater range of motion and smoother articulation for superior handling. These arms are also available in a red powder-coated finish for a custom look that stands out in the wheel wells. Pre-Installed Ball Joints: No hassle, no extra steps - our ball joints come pre-installed, making installation easier and ensuring long-term reliability.Hassle-Free Installation: Enjoy a bolt-on installation with no cutting or drilling required! This means less time in the garage and more time conquering trails.At Rough Country, we know every off-road journey is unique. That's why our 3-inch kit is fully adaptable, allowing you to choose between nitrogen-charged N3 shocks/struts for a smooth ride or M1 Monotubes for premium performance. With Rough Country, you're not just lifting your RAM - you're redefining your off-road experience.

Features

• Hassle-Free Installation: Easy bolt-on design for a quick and seamless setup.\ No Modifications Needed: No cutting or drilling required for a perfect fit.\ Premium Upper Control Arms: Includes new forged aluminum control arms for added strength.\ Enhanced Range of Motion: POM ball joints allow greater articulation and easier installation.\ Pre-Installed Ball Joints: Comes ready to install, saving you time and effort.\ Improved Ground Clearance: Provides extra height for tackling rough terrain.\ Front-to-Rear Leveling: Eliminates the factory rake for a balanced stance.\ Reversible Upgrade: Can be returned to stock if needed.\ Fully Configurable with Multiple Shock/Strut Options: Choose from our nitrogen-charged N3 shocks to the premium M1 monotube's for the perfect ride quality.

Note: Due to variances in motor weight our replacement struts do NOT fit 3.6L Pentastar V6 engine. Does NOT fit models with 4-Corner Air-Suspension found standard on Rebel and Limited models. This package is an available upgrade across multiple sub-models. For a visual to confirm if your vehicle is equipped, click here. Does NOT fit Warlock models as they are equipped with a 1-inch factory lift. Tire & Wheel Details Models retaining factory wheels are advised to run no wider than an 11.5" wide tire. For additional clearance on models equipped with aggressive side wall tires a 0.25 wheel spacer is recommended SKU: #1065.

Installation Instructions (PDF)

Lift, level, and smooth out your ride with Rough Country's new and improved 2.5-inch RAM 2500 Leveling Kit. Engineered to fit RAM trucks equipped with front radius arm suspension setups, this easy-to-install kit gives a big boost at an unbelievable price!\ Rough Country's durable coil spring spacers have been expertly redesigned to match the factory geometry of your truck, including the angle of the coil mounts and position of the rubber isolator, which perfectly indexes both springs to eliminate any chance of coil bowing. This kit has also been upgraded to include shock extension brackets that allow you to reuse your factory shocks at the optimum angle for your new lifted truck\ This kit also features a lightning fast, 100% bolt-on installation process that couldn't be easier or less invasive to your new vehicle. Includes Rough Country's Lifetime Replacement Warranty.

Features

• Easy bolt-on installation\ Maintains factory ride quality

Note: Does not fit rear air-ride models Does not fit Power Wagon models

Installation Instructions (PDF)

Lift, level, and smooth out your ride with Rough Country's new and improved 2.5-inch RAM 2500 Leveling Kit. Engineered to fit RAM trucks equipped with front radius arm suspension setups, this easy-to-install kit gives a big boost at an unbelievable price!Rough Country's durable coil spring spacers have been expertly redesigned to match the factory geometry of your truck, including the angle of the coil mounts and position of the rubber isolator, which perfectly indexes both springs to eliminate any chance of coil bowing. This kit has also been upgraded to include shock extension brackets that allow you to reuse your factory shocks at the optimum angle for your new lifted truckThis kit also features a lightning fast, 100% bolt-on installation process that couldn't be easier or less invasive to your new vehicle. Includes Rough Country's Lifetime Replacement Warranty.

Features

• Easy bolt-on installation\ Maintains factory ride quality

Note: Does not fit rear air-ride models Does not fit "Power Wagon" models

Installation Instructions (PDF)

Many Dodge Ram models are plagued with a poorly supported steering box that prematurely wears causing sloppy steering and road wander. Rough Country's Steering Brace for Dodge RAM 2500/3500 pickup trucks is the answer to this common problem. This durable brace adds rigid support for the sector shaft, eliminating any side-to-side play, and ties the frame horns together, helping to eradicate frame flex, offering a tighter steering feel and longer lifespan for your steering box.Rough Country's Steering Box Brace features a 100% bolt-on install process for easy installation and can be installed using common tools in a home garage. This brace is precision cut for a perfect fit and powder-coated to resist corrosion and withstand the elements. This kit Includes Rough CountryΓÇÖs Lifetime Replacement Warranty!\

Features

• Creates a tighter steering feel, eliminating any side-to-side play or "wander."\ Helps eliminate frame flex by tying the bottom pivot point of the steering box to both frame rails.\ Longer lifespan for your steering box\ Easy bolt-on installation\ Powder coated black for corrosion resistance

Note: Does NOT fit models with electronic sway-bar disconnect option

Installation Time: 2-3 hours

Installation Instructions (PDF)

Give the front-end of your Dodge RAM 1500 a unique look with Rough CountryΓÇÖs Mesh Grille kit. This grille replacement kit swaps out your stock grille with the eye-catching, head-turning good looks of this aftermarket upgrade. With a unique, laser-cut mesh pattern surrounded by stylish, stainless steel button-head bolts, this grill gives your truck a more menacing look thatΓÇÖs sure to draw attention. Each kit is powdercoated black to resist corrosion and give a long lifespan of good looks.

Features

• Unique Mesh Pattern\ Corrosion Resistant Black Powdercoat \ Stainless Steel Hardware\ Limited lifetime warranty

Note: Requires cutting and drilling Replaces factory grille Does not fit 'Rebel' models Does not fit 'Limited Edition' models

Installation Time: 3-4 hours

Installation Instructions (PDF)

Give the front-end of your Ram 2500 or 3500 a unique look with Rough CountryΓÇÖs Mesh Grille kit! This grille replacement kit swaps out your stock grille with the eye-catching, head-turning good looks of this aftermarket upgrade. With a unique, laser-cut mesh pattern surrounded by stylish, stainless steel button head bolts, this grille gives your truck a more menacing look thatΓÇÖs sure to draw attention. Each kit is powder-coated black to resist corrosion and give a long lifespan of good looks.This grille is available with an integrated 30ΓÇ¥ Curved Dual-Row LED light bar or choose our standard, non-LED grille for a classic mesh look. Includes a mountable on/off switch, wiring harness, and our 3 Year Warranty!

Features

• // Grille Details
• \ Unique Mesh Pattern\ Corrosion Resistant Black Powdercoat \ Stainless Steel Hardware\ Limited lifetime warranty\ // LED Details
• \ 14400 lumens\ 180 watts\ Contains 60, 3 watt High Intensity CREE LEDs\ 8 degree spot / 90 degree flood combo pattern\ IP67 Waterproof rating\ Black panel design\ Durable die-cast aluminum housing\ Moisture Breather technology reduces moisture build-up behind the lens\ Noise Silencers eliminate hum, whistle, and other wind noises associated with mounted LED Light bars\ Includes premium, flat-wound wiring harness with on/off switch\ 3 year warranty

Note: Requires cutting and drilling Replaces factory grille Does not fit 'Limited' models Does not fit 'Power Wagon' models Does not fit 'Active Grille Shutter' models LED Light Bar is for off-road use ONLY California Residents: Prop65 Warning

Installation Time: 4-6 hours

Installation Instructions (PDF)

Give the front-end of your Ram 2500 or 3500 a unique look with Rough CountryΓÇÖs Mesh Grille kit! This grille replacement kit swaps out your stock grille with the eye-catching, head-turning good looks of this aftermarket upgrade. With a unique, laser-cut mesh pattern surrounded by stylish, stainless steel button head bolts, this grille gives your truck a more menacing look thatΓÇÖs sure to draw attention. Each kit is powder-coated black to resist corrosion and give a long lifespan of good looks.

Features

• Unique Mesh Pattern\ Corrosion Resistant Black Powdercoat \ Stainless Steel Hardware\ Limited lifetime warranty

Note: Requires cutting and drilling Replaces factory grille Does not fit 'Limited' models Does not fit 'Power Wagon' models California Residents: Prop65 Warning

Installation Time: 4-6 hours

Installation Instructions (PDF)

Transform your fourth-generation RAM 1500 with Rough Country's complete 4-inch Suspension Lift Kit. This all-inclusive system delivers an aggressive, commanding stance that perfectly complements your truck's rugged new design.Preserve Your Smooth Factory Ride: Experience the same comfortable and controlled driving feel you love. Our kit maintains a smooth factory-like ride quality so every journey, on-road or off, is just as comfortable as before.Boost Your Ground Clearance for Ultimate Off-Road Confidence: Gain plenty of added clearance to tackle the toughest trails and obstacles with ease. The 4-inch lift lets you run up to massive 35-inch tires for a bold look and enhanced off-road capability.Achieve a Balanced, Aggressive Stance: Level your RAM's front and rear for a sleek, aggressive profile that turns heads everywhere you go. The kit includes precision-engineered front and rear crossmembers, each laser-cut with the iconic RC logo for a fierce yet streamlined appearance.Fully Configurable with Premium Shock Options: Customize your ride quality with shock absorbers that match your driving style, from nitrogen-charged N3 shocks for balanced performance to the premium M1 Monotube shocks for the ultimate ride.Clean Installation with Long-Term Durability: All components are designed with drop brackets and proper geometry to keep your truck looking sharp and functioning flawlessly, no loose parts or unsightly hangers. Backed by Rough Country's Limited Lifetime Replacement Guarantee, this kit is built to last.Upgrade your RAM 1500 with Rough Country's 4-inch Suspension Lift Kit, dominate the trails, look the part, and drive like a champion every mile of the way.

Features

• Preserves Smooth Factory Ride: Enjoy the same comfortable and controlled driving experience.\ Boosts Ground Clearance: Tackle rough terrain and obstacles with added confidence.\ Achieves a Balanced Stance: Levels the front and rear for a sleek, aggressive look.\ Fully Configurable with Multiple Shock/Strut Options: Choose from our nitrogen-charged N3 shocks to M1 Monotubes for the perfect ride quality.

Note: Due to variances in motor weight our replacement struts do NOT fit models equipped with a 3.6L Pentastar V6 engine. Does NOT fit models with 4-Corner Air-Suspension found standard on Rebel and Limited models. This package is an available upgrade across multiple sub-models. For a visual to confirm if your vehicle is equipped, click here. Does NOT fit Warlock models as they are equipped with a 1-inch factory lift. This kit is NOT recommended for AWD models due to pinion angle issues, which cause drivetrain vibrations. Tire & Wheel Details Requires 20" or larger wheels! Does NOT fit 18" or smaller wheels.

Installation Instructions (PDF)

Transform your fourth-generation RAM 1500 with Rough Country's complete 6in Suspension Lift Kit. This all-inclusive system delivers an aggressive, commanding stance that perfectly complements your truck's rugged new design.Preserve Your Smooth Factory Ride: Experience the same comfortable and controlled driving feel you love. Our kit maintains a smooth factory-like ride quality so every journey, on-road or off, is just as comfortable as before.Boost Your Ground Clearance for Ultimate Off-Road Confidence: Gain plenty of added clearance to tackle the toughest trails and obstacles with ease. The 6-inch lift lets you run up to massive 37-inch tires for a bold look and enhanced off-road capability.Achieve a Balanced, Aggressive Stance: Level your RAM's front and rear for a sleek, aggressive profile that turns heads everywhere you go. The kit includes precision-engineered front and rear crossmembers, each laser-cut with the iconic RC logo for a fierce yet streamlined appearance.Optimized Ride Quality with Application-Specific Springs: Enjoy improved handling, ride comfort, and load support thanks to dual-rate rear coil springs (optional upgrade) tailored for your RAM. Whether cruising highways or conquering rocky terrain, this kit adapts seamlessly.Fully Configurable with Premium Shock Options: Customize your ride quality with shock absorbers that match your driving style, from nitrogen-charged N3 shocks for balanced performance to the premium Vertex reservoir shocks for the ultimate ride.Clean Installation with Long-Term Durability: All components are designed with drop brackets and proper geometry to keep your truck looking sharp and functioning flawlessly, no loose parts or unsightly hangers. Backed by Rough Country's Limited Lifetime Replacement Guarantee, this kit is built to last.Upgrade your RAM 1500 with Rough Country's 6in Suspension Lift Kit, dominate the trails, look the part, and drive like a champion every mile of the way.

Features

• Preserves Smooth Factory Ride: Enjoy the same comfortable and controlled driving experience.\ Boosts Ground Clearance: Tackle rough terrain and obstacles with added confidence.\ Achieves a Balanced Stance: Levels the front and rear for a sleek, aggressive look.\ Optimized Ride Quality: Application-specific dual-rate rear coil springs are available to enhance handling, comfort, and load support across varying terrains.\ Fully Configurable with All Shock Options: Choose from our nitrogen-charged N3 shocks to the premium Vertex reservoir for the perfect ride quality.

Note: Due to variances in motor weight our replacement struts do NOT fit models equipped with a 3.6L Pentastar V6 engine. Does NOT fit models with 4-Corner Air-Suspension found standard on Rebel and Limited models. This package is an available upgrade across multiple sub-models. For a visual to confirm if your vehicle is equipped, click here. Does NOT fit Warlock models as they are equipped with a 1-inch factory lift. This kit is NOT recommended for AWD models due to pinion angle issues, which cause drivetrain vibrations. Tire & Wheel Details Requires 20" or larger wheels! Does NOT fit 18" or smaller wheels.

Installation Instructions (PDF)

Transform your fourth-generation RAM 1500 with Rough Country's complete 4-inch Suspension Lift Kit. This all-inclusive system delivers an aggressive, commanding stance that perfectly complements your truck's rugged new design.Preserve Your Smooth Factory Ride: Experience the same comfortable and controlled driving feel you love. Our kit maintains a smooth factory-like ride quality so every journey, on-road or off, is just as comfortable as before.Boost Your Ground Clearance for Ultimate Off-Road Confidence: Gain plenty of added clearance to tackle the toughest trails and obstacles with ease. The 4-inch lift lets you run up to massive 35-inch tires for a bold look and enhanced off-road capability.Achieve a Balanced, Aggressive Stance: Level your RAM's front and rear for a sleek, aggressive profile that turns heads everywhere you go. The kit includes precision-engineered front and rear crossmembers, each laser-cut with the iconic RC logo for a fierce yet streamlined appearance.Fully Configurable with Premium Shock Options: Customize your ride quality with shock absorbers that match your driving style, from nitrogen-charged N3 shocks for balanced performance to the premium M1 Monotube shocks for the ultimate ride.Clean Installation with Long-Term Durability: All components are designed with drop brackets and proper geometry to keep your truck looking sharp and functioning flawlessly, no loose parts or unsightly hangers. Backed by Rough Country's Limited Lifetime Replacement Guarantee, this kit is built to last.Upgrade your RAM 1500 with Rough Country's 4-inch Suspension Lift Kit, dominate the trails, look the part, and drive like a champion every mile of the way.

Features

• Preserves Smooth Factory Ride: Enjoy the same comfortable and controlled driving experience.\ Boosts Ground Clearance: Tackle rough terrain and obstacles with added confidence.\ Achieves a Balanced Stance: Levels the front and rear for a sleek, aggressive look.\ Fully Configurable with Multiple Shock/Strut Options: Choose from our nitrogen-charged N3 shocks to M1 Monotubes for the perfect ride quality.

Note: Due to variances in motor weight our replacement struts do NOT fit models equipped with a 3.6L Pentastar V6 engine. Does NOT fit models with 4-Corner Air-Suspension found standard on Rebel and Limited models. This package is an available upgrade across multiple sub-models. For a visual to confirm if your vehicle is equipped, click here. Does NOT fit Warlock models as they are equipped with a 1-inch factory lift. This kit is NOT recommended for AWD models due to pinion angle issues, which cause drivetrain vibrations. Tire & Wheel Details Requires 20" or larger wheels! Does NOT fit 18" or smaller wheels.

Installation Instructions (PDF)

Level Your Stance: Rough Country's 2-Inch Leveling Kit for Ram 1500 eliminates the factory rake by raising the front end, giving your truck a clean, aggressive profile. This simple upgrade balances your ride while adding enough height to fit up to a 295/60R20 tire for a tougher, more commanding look.Built to Last: Featuring a durable pre-load spacer, this kit is engineered to handle the elements and rough terrain with ease. It's a straightforward, bolt-on solution that installs quickly without any cutting or permanent modifications.Ride Smooth, Drive Confident: Maintain your RAM's factory ride quality by reusing the original coil springs. This design ensures you get added ground clearance without sacrificing comfort or handling.Aggressive Look, Guaranteed: Give your RAM 1500 the bold appearance it deserves, backed by Rough Country's Limited Lifetime Replacement Guarantee for unbeatable value and peace of mind.

Features

• Hassle-Free Installation: Bolt-on design for a quick and easy upgrade with no cutting or welding required.\ Boosted Ground Clearance: Gain extra clearance to conquer off-road terrain and obstacles with confidence.\ Level Stance: Eliminates the factory rake by leveling the front to match the rear for a balanced, aggressive look.\ Factory Ride Retained: Keeps your original coil spring and ride comfort intact for a smooth, factory-like driving experience.\

Note: Requires disassembling your strut to install. Does NOT fit models equipped with the Off-Road package as they are equipped with a 1-inch factory lift. Does NOT fit models with 4-Corner Air-Suspension found standard on Limited and Limited Longhorn models. This package is an available upgrade across multiple sub-models. For a visual to confirm if your vehicle is equipped, click here. Does NOT fit TRX models as they are equipped with a long-travel suspension and Bilstein Black Hawk e2 adaptive performance shocks. Does NOT fit Warlock models as they are equipped with a 1-inch factory lift. Tire & Wheel Details Maximum tire width is 11.5ΓÇ¥.

Installation Time: 1-3 hours

Installation Instructions (PDF)

Take Control of Every Turn: Rough Country's N3 Steering Stabilizer Kit is engineered to eliminate bump steer, front-end shimmy, and steering vibration caused by rough roads or oversized tires. Whether you're hitting the trail or the pavement, it delivers a smoother, more predictable ride by dampening harsh feedback through the steering wheel.Fix Common Steering Issues: If your vehicle pulls to one side, feels loose after hitting a bump, or suffers from a shaky steering wheel - this stabilizer helps correct those problems. It absorbs sudden impacts that can throw off your handling and alignment, especially in lifted applications.Protect Your Steering System: Rough Country's stabilizer helps reduce wear and tear on key components like tie rods, ball joints, and tires. It's a must-have for vehicles running larger wheels or off-road setups, helping preserve performance and extend component life.Bolt-On Upgrade with Big Benefits: With a 100% bolt-on design, installation is fast and hassle-free. It's one of the easiest ways to improve handling, reduce road feedback, and reinforce the reliability of your steering system - backed by the trusted Rough Country name.

Features

• Hassle-Free Installation: Easy bolt-on design for a quick, straightforward upgrade with no cutting or drilling required.\ Enhanced Control and Stability: Delivers improved steering response and smoother handling on and off the road.\ Minimizes Bump Steer: Reduces harsh feedback from uneven terrain for a more comfortable, predictable ride.\ Protects Critical Components: Lessens wear and tear on tie rods and ball joints, extending the life of your steering system.

Note: ONLY fits models with 2.5-inches or more of front suspension lift

Installation Time: 2-3 hours

Installation Instructions (PDF)

Climbing into your truck should never feel like a workout. With Rough Country's all-new bolt-on Nerf Steps, getting in and out is a breeze. Experience effortless access and elevate your truck with a sleek, durable upgrade.Enhanced Undercarriage Protection: Say goodbye to road debris, rocks, and obstacles that could damage your undercarriage. Our Nerf Steps act as a shield, protecting your vehicle from the harsh elements below.Integrated Stone Guards for Added Protection: Keep your Ram 1500 looking like new. The built-in stone guards effectively deflect kicked-up rocks and debris, preserving your vehicle's paint job from potential damage.Sleek, Streamlined Design: No bulky bars here, just a clean, high and tight profile that follows your cab's contours. These Nerf Steps provide a polished, streamlined look that enhances your truck's rugged yet refined style.Built to Endure: Crafted from .084 wall, corrosion-resistant tubing, these Nerf Steps are engineered to withstand anything the road or trail throws at them. From muddy trails to harsh environments, they'll handle it all while staying tough and reliable.Quick and Easy Installation: No drilling required, just bolt them on and enjoy a hassle-free installation. Spend less time working and more time exploring with this straightforward, user-friendly design.Limited Lifetime Warranty: Backed by Rough Country's Limited Lifetime Warranty, these Nerf Steps provide lasting durability and peace of mind for years to come.Step up your truck's style and protection with Rough Country Nerf Steps. Easy installation, superior defense, and a sleek, high-end design, everything you need to take your vehicle to the next level.

Features

• Sleek Drop Step Design: Features a functional drop step design, offering easy access to your vehicle while maintaining a stylish look.\ Extended Main Bar for Full Coverage: The main bar stretches the entire length of the cab, ensuring comprehensive protection and support.\ Direct Bolt-On Brackets: Brackets are designed to bolt directly to the nerf bar for a secure and stable fit.\ High and Tight Positioning for a Cleaner Look: The bar is strategically positioned to sit high and tight, providing a sleek, finished appearance.\ Superior Protection Against Road Debris: Shield your vehicle from flying road debris and environmental wear with this added protective feature.\ Corrosion-Resistant .084 Wall Tubing: Built from heavy-duty .084 wall tubing that resists corrosion, ensuring durability in all weather conditions.\ Conceals Exposed Frame for a Neater Look: Effectively hide unsightly exposed frame parts under your vehicle for a cleaner, more polished appearance.\ Limited Lifetime Warranty: Backed by Rough Country's lifetime warranty against material and workmanship failures - including welds, brackets, and structural components - for the original purchaser. The finish is covered by a 1-year warranty.

Note: ONLY fits crew cab models. ONLY fits models with 5'7" bed.

Installation Time: 1-2 hours

Installation Instructions (PDF)