Give your rear wheel wells superior protection and a striking, new look with Rough CountryΓÇÖs Rear Wheel Well Liners. Made of high-density Polyethylene plastic, these durable liners help conceal the unsightly gap between the body and frame which is more noticeable after lifting. The stylish, contoured design is perfectly tailored for a precise fit to your truck, while the all-black finish helps bring an aggressive look to the rear of your vehicle.Rough Country Rear Wheel Well Liners offer an extra barrier of protection to help shield your wheel wells from rocks, mud, salt, and harsh weather. With all the small, hard to clean areas covered, cleanup is fast and simple.Installation is easy too! Rough Country Rear Wheel Well Liners feature a bolt-on installation process thatΓÇÖs easy enough to do with common tools in a home garage.

Features

• Quick and easy installation\ Enhances your truck's appearance by providing a more finished look\ Protects against damage from rocks, dirt, salt, road debris and weather elements\ Hides the gap between the frame and body\ Limited Lifetime Warranty on material and workmanship\ Made of high-density Polyethylene plastic\ Made in the USA\ Sold in pairs

Note: Does NOT fit Chevrolet models Does NOT fit 2007 "Classic" models Does NOT fit dually models Aftermarket fender flares may need to be temporarily removed for installation. California Residents: Prop65 Warning

Installation Time: 30 min

Installation Instructions (PDF)

Features

• Overall Length: 36-inches\ Tube Length: 21.25-inches\ After lifting many full sized vehicles a CV (Double Cardan) drive shaft is a good choice to eliminate vibration issues and provide the longest lasting drive shaft.

Note: ONLY fits AWD GMC Sierra 1500 Denali models. Necessary for 02-15 GMC AWD 1500 Denali Pickup models with 5in - 7.5in of suspension lift to correct vibration.

Installation Time: 3-4 hours

Installation Instructions (PDF)

Run up to a 32-inch tire while leveling the front of your vehicle with the rear, using Rough Country's 2-inch Leveling Suspension Kit for GMC Sierra Denali 1500 Pickups equipped with Magnetic Ride Control. This set of lower front strut mount extensions immediately offers increased ground clearance without the hassle of a long and drawn out installation process. Featuring 100% bolt-on installation and a unique design that allows fitment without the need to disassemble the strut, you're ready to get that killer look in no-time flat.

Features

• Maintains factory ride quality\ Increased ground clearance\ Levels the front with the rear of the vehicle\ No need to disassemble your struts to install\ 100% simple bolt-on installation

Note: ONLY fits GMC Denali models w/Magnetic Ride Control

Installation Time: 2-3 hours

Installation Instructions (PDF)

Get the look you really want with Rough Country's 5-inch Suspension Kit for GMC Sierra Denali 1500 Pickups equipped with Magnetic Ride Control. This massive kit affords your truck the ability to run 33-inch tires on factory wheels with our beefy lifted knuckles and is designed with 100% laser-cut materials for the best possible fit on your vehicle.Includes a set of front and rear high-clearance crossmembers featuring the "RC" logo and a differential skid-plate. Each kit also comes with a set of durable, fabricated lift blocks that are stronger and offer a longer lifespan than cast blocks.Give your pickup an aggressive, lifted and level stance with incredible ride quality! Our innovative Lifted Knuckle design boosts ride height while keeping all components at the optimum angles for a factory-like ride. Includes Rough Country's Lifetime Replacement Warranty.

Features

• Can run 33-inch tires on factory 20-inch wheels.\ Provides highly sought level stance.\ High clearance crossmember design gives unmatched ground clearance.\ 100% precision laser cut materials using the latest computer aided design process.\ Fabricated blocks are stronger and offer a longer lifespan than cast blocks.

Note: Requires cutting and drilling. If wider than 33x12.50 tires are used, offset wheels will be required and trimming may be required. 18-inch or larger wheels are required. Please view installation instructions for complete information on proper tire/wheel combinations. If truck is equipped with a mass damper on the front differential, the damper must be removed. ONLY fits models with factory aluminum or stamped steel control arms. ONLY fits GMC Denali models with Magnetic Ride Control.

Installation Instructions (PDF)

Get the look you really want with Rough Country's 5-inch Suspension Kit for GMC Sierra Denali 1500 Pickups equipped with Magnetic Ride Control. This massive kit affords your truck the ability to run 33-inch tires on factory wheels with our beefy lifted knuckles and is designed with 100% laser-cut materials for the best possible fit on your vehicle.Includes a set of front and rear high-clearance crossmembers featuring the "RC" logo and a differential skid-plate. Each kit also comes with a set of durable, fabricated lift blocks that are stronger and offer a longer lifespan than cast blocks.Give your pickup an aggressive, lifted and level stance with incredible ride quality! Our innovative Lifted Knuckle design boosts ride height while keeping all components at the optimum angles for a factory-like ride. Includes Rough Country's Lifetime Replacement Warranty.

Features

• Can run 33-inch tires on factory 20-inch wheels.\ Provides highly sought level stance.\ High clearance crossmember design gives unmatched ground clearance.\ 100% precision laser cut materials using the latest computer aided design process.\ Fabricated blocks are stronger and offer a longer lifespan than cast blocks.

Note: Requires cutting and drilling. If wider than 33x12.50 tires are used, offset wheels will be required and trimming may be required. 18-inch or larger wheels are required. Please view installation instructions for complete information on proper tire/wheel combinations. If truck is equipped with a mass damper on the front differential, the damper must be removed. ONLY fits models with factory cast steel knuckles or control arms. ONLY fit GMC Denali models with Magnetic Ride Control.

Installation Instructions (PDF)

Get the look you really want with Rough Country's 6-inch Suspension Kit for GMC Sierra Denali 1500 Pickups equipped with Magnetic Ride Control. This massive kit affords your truck the ability to run 33-inch tires on factory wheels with our beefy lifted knuckles and is designed with 100% laser-cut materials for the best possible fit on your vehicle.Includes a set of front and rear high-clearance crossmembers featuring the "RC" logo and a differential skid-plate. Each kit also comes with a set of durable, fabricated lift blocks that are stronger and offer a longer lifespan than cast blocks.Give your pickup an aggressive, lifted and level stance with incredible ride quality! Our innovative Lifted Knuckle design boosts ride height while keeping all components at the optimum angles for a factory-like ride. Includes Rough Country's Lifetime Replacement Warranty.

Features

• Can run 33-inch tires on factory 20-inch wheels.\ Provides highly sought level stance.\ High clearance crossmember design gives unmatched ground clearance.\ 100% precision laser cut materials using the latest computer aided design process.\ Fabricated blocks are stronger and offer a longer lifespan than cast blocks.

Note: Requires cutting and drilling. If wider than 33x12.50 tires are used, offset wheels will be required and trimming may be required. 18-inch or larger wheels are required. Please view installation instructions for complete information on proper tire/wheel combinations. If truck is equipped with a mass damper on the front differential, the damper must be removed. ONLY fits models with factory cast steel knuckles or control arms. ONLY fits GMC Denali models with Magnetic Ride Control.

Installation Instructions (PDF)

Off-Road Action has never been more affordable thanks to Rough Country's 2.5in Suspension Lift for GMC Sierra Denali 1500 Pickups equipped with Magnetic Ride Control. If you're looking for something more than a simple leveling kit, look no further! This new design utilizes our popular 2in Lower Strut Extensions combined with a set of strut spacers and rear blocks to achieve a total of 2.5in of lift - enough clearance to run up to a 285/70/17 tire - all at a price that won't break the bank!This kit includes a set of Fabricated 2in Rear Blocks to replace the OEM 1in block. Fabricated blocks offer a longer lifespan than cast blocks and are less susceptible to damage and the environment. Not only is this kit affordable, it's also easy to install, featuring a 100% bolt-on installation procedure with no need for a strut compressor to install. Lift your Magneride Denali 1500 easily, efficiently, and with money to spare!

Features

• Maintains factory ride quality\ Increased ground clearance\ Levels the front with the rear of the vehicle\ No need to disassemble your struts to install\ 100% simple bolt-on installation\ Fabricated blocks offer a longer lifespan than cast blocks.

Note: ONLY fits Denali models w/Magnetic Ride Control ONLY fits models with factory Cast Aluminum control arms. Does NOT fit models with factory Stamped Steel control arms.

Installation Instructions (PDF)

Get the look you really want with Rough Country's 6-inch Suspension Kit for GMC Sierra Denali 1500 Pickups equipped with Magnetic Ride Control. This massive kit affords your truck the ability to run 33-inch tires on factory wheels with our beefy lifted knuckles and is designed with 100% laser-cut materials for the best possible fit on your vehicle.Includes a set of front and rear high-clearance crossmembers featuring the "RC" logo and a differential skid-plate. Each kit also comes with a set of durable, fabricated lift blocks that are stronger and offer a longer lifespan than cast blocks.Give your pickup an aggressive, lifted and level stance with incredible ride quality! Our innovative Lifted Knuckle design boosts ride height while keeping all components at the optimum angles for a factory-like ride. Includes Rough Country's Lifetime Replacement Warranty.

Features

• Can run 33-inch tires on factory 20-inch wheels.\ Provides highly sought level stance.\ High clearance crossmember design gives unmatched ground clearance.\ 100% precision laser cut materials using the latest computer aided design process.\ Fabricated blocks are stronger and offer a longer lifespan than cast blocks.

Note: Requires cutting and drilling. If wider than 33x12.50 tires are used, offset wheels will be required and trimming may be required. 18-inch or larger wheels are required. Please view installation instructions for complete information on proper tire/wheel combinations. If truck is equipped with a mass damper on the front differential, the damper must be removed. ONLY fits models with factory cast aluminum or stamped steel control arms. ONLY fits GMC Denali models with Magnetic Ride Control.

Installation Instructions (PDF)

ThereΓÇÖs no better way to deck out that new truck you worked so hard for than with the aggressive stance and jaw-dropping ride height of Rough Country's 7-inch Suspension Lift for GMC Sierra Denali 1500 Pickups equipped with Magnetic Ride Control. This massive lift is designed to retain your stock track width! This affords your truck the ability to run up to an impressive 35-inch tire on factory 20-inch wheels, and gives you a nearly limitless choice in aftermarket wheels and tires that other kits just can't fit.This kit ships with EVERYTHING you need to give your new truck the aggressive stance and capabilities it deserves; stout upper strut spacers, a beefy front and rear skid plate, our heavy duty front and rear crossmembers, and a set of differential and sway-bar drop brackets - all designed by our in-house Research and Development team with 100% laser-cut materials for the best possible fit on your vehicle. This whopping 7-inch Lift also comes with a set of rear 6-inch fabricated anti-wrap lift blocks that offer a huge boost while helping combat dreaded axle wrap issues on inferior big lifts. Includes Rough Country's Lifetime Replacement Warranty.

Features

• Increased ground clearance\ Maintains stock track width.\ Can run factory 20-inch wheels.\ Fabricated blocks are stronger and offer a longer lifespan than cast blocks.\ Specially designed anti-axle wrap rear blocks maintain stock ride quality while eliminating common lift block problem.

Note: Requires cutting and drilling. If wider than 35x12.50 tires are used, offset wheels will be required and trimming may be required. 18-inch or larger wheels are required. Please view installation instructions for complete information on proper tire/wheel combinations. If truck is equipped with a mass damper on the front differential, the damper must be removed. ONLY fits models with factory steel knuckles and control arms. ONLY fits GMC Denali models with Magnetic Ride Control.

Installation Instructions (PDF)

Give your rear wheel wells superior protection and a striking, new look with Rough CountryΓÇÖs Rear Wheel Well Liners. Made of high-density Polyethylene plastic, these durable liners help conceal the unsightly gap between the body and frame which is more noticeable after lifting. The stylish, contoured design is perfectly tailored for a precise fit to your truck, while the all-black finish helps bring an aggressive look to the rear of your vehicle.Rough Country Rear Wheel Well Liners offer an extra barrier of protection to help shield your wheel wells from rocks, mud, salt, and harsh weather. With all the small, hard to clean areas covered, cleanup is fast and simple.Installation is easy too! Rough Country Rear Wheel Well Liners feature a bolt-on installation process thatΓÇÖs easy enough to do with common tools in a home garage.

Features

• Quick and easy installation\ Enhances your truck's appearance by providing a more finished look\ Protects against damage from rocks, dirt, salt, road debris and weather elements\ Hides the gap between the frame and body\ Limited Lifetime Warranty on material and workmanship\ Made of high-density Polyethylene plastic\ Made in the USA\ Sold in pairs

Note: Does NOT fit Chevrolet models Does NOT fit dually models Does NOT fit models with fifth wheel hitch Aftermarket fender flares may need to be temporarily removed for installation. California Residents: Prop65 Warning

Installation Time: 30 min

Installation Instructions (PDF)

Bring the state-of-the-art power and efficiency of LED lighting to your GMC 1500ΓÇÖs factory fog lights with Rough Country's 2-inch Fog Light LED Kit. This clever LED & mount combo allows you to swap out the factory fog lights with Rough Country's 2-inch LED Cubes, offering increased illumination and killer, good looks that blend right in with the 2014-2015 Sierra 1500 design.Light up the road with 36 watts and 2880 Lumens of output power. These all-weather LED lights feature a die-cast aluminum housing and include a wiring harness that easily connects to the factory fog light wiring. Includes a 3-Year ManufacturerΓÇÖs Warranty.

Features

• // Bracket Details
• \ Installs in factory fog light location\ Corrosion Resistant Black Powdercoat \ Limited lifetime warranty\ // LED Details
• \ 2880 lumens\ 36 watts\ 30 degree spot beam\ Each light contains 6, 3 watt high intensity Cree LEDs\ IP67 Waterproof rating\ Black panel design\ Durable die cast aluminum housing\ Includes premium, flat-wound wiring harness with on/off switch\ 3 year warranty

Note: Mounts to standard factory bumper ONLY For off-road use ONLY Requires cutting and drilling California Residents: Prop65 Warning

Installation Time: 3-4 hours

Installation Instructions (PDF)

Transform your fifth-generation GMC Sierra 1500 with Rough Country's 6-Inch Suspension Lift Kit, engineered to elevate both your stance and your off-road prowess. Designed to complement the truck's aggressive factory styling, this all-in-one lift solution delivers a bold, leveled look and the clearance needed to run 35x12.50 tires on 10-inch wide wheels.Front-to-Rear Lift & Leveling: Gain a clean, aggressive stance with improved ground clearance for better trail performance and street presence.Precision Engineering, Off-Road Ready: This kit features a high-clearance crossmember that maintains optimal suspension geometry while maximizing off-road capability. Extreme-duty cast knuckles and heavy-duty fabricated blocks provide rugged durability built to endure the harshest driving conditions.Factory Fitment, Simplified Install: Enjoy a bolt-on installation that requires no strut disassembly and no differential trimming, saving you time and preserving the factory integrity of your Sierra. The laser-cut, CAD-designed components ensure a perfect fit and unmatched strength.Retains Stock Handling & Compatibility: With factory track width maintained, you keep the truck's original handling characteristics while minimizing wear and tear. This kit also works with all Rough Country shock/strut options, from nitrogen-charged N3s to the premium Vertex reservoir, so you can tailor your ride to your driving needs.Every kit includes front and rear crossmembers, a durable skid plate for enhanced chassis strength, and Rough Country's Limited Lifetime Replacement Guarantee for complete peace of mind.

Features

• Front-to-Rear Lift & Leveling: Raises and levels your vehicle for a clean, aggressive stance and improved ground clearance.\ High-Clearance Crossmember: Engineered for optimal suspension geometry and enhanced off-road capability.\ Extreme-Duty Cast Knuckles: Built tough for long-lasting durability under the harshest driving conditions.\ Maintains Factory Track Width: Preserves original handling characteristics and minimizes additional wear.\ No Strut Disassembly Required: Hassle-free installation with zero need to dismantle factory components.\ No Differential Trimming Needed: Clean bolt-on design saves time and keeps factory integrity intact.\ Laser-Cut Precision Materials: CAD-designed and CNC laser cut for a perfect fit and unmatched strength.\ Heavy-Duty Fabricated Blocks: Stronger and more durable than cast alternatives for long-term reliability.\ Fully Configurable with All Shock/Strut Options: Choose from our nitrogen-charged N3's to the premium Vertex reservoir for the perfect ride quality.

Note: Requires cutting and drilling. Does NOT fit 2019 "Classic" models. (2018 body style) Does NOT fit Denali or Denali Ultimate models as they are equipped with Adaptive Ride Control as a standard package. Does NOT fit AT4 models as it is equipped with a 2-inch factory lift. Does NOT fit AT4X models as it is equipped with a 2-inch factory lift and Multimatic DSSV dampers. Due to variances in motor weight, Rough Country's replacement strut options do NOT work on diesel models. Tire & Wheel Details Does NOT fit factory wheels. 20-inch or larger aftermarket wheels are required. Wheels must feature 4.5in backspacing to fit. Please test fit wheels prior to installation. Some aftermarket wheels may require 0.25" wheel spacer SKU: 1065.

Installation Instructions (PDF)

Experience superior ride quality on and off the road with Rough Country's premium N3 shocks!Enhanced Performance: Engineered with 10-stage variable valving, these shocks provide precise damping control for a smooth highway ride and confident off-road handling.Reliable Durability: The high-pressure nitrogen charge ensures consistent performance, while the durable 18mm chromed hardened piston rod resists corrosion and enhances longevity.Superior Cooling Efficiency: A robust 54mm shock body dissipates heat faster, preventing shock fade during intense use.Built to Last: With an impressive 36kN tensile strength, these shocks are designed to endure heavy impacts and challenging terrain.All-Weather Reliability: Military-spec fluid rated to -40 degrees celsius ensures dependable performance in extreme conditions.Smooth and Quiet Ride: Natural rubber bushings absorb vibrations and minimize road noise for improved comfort.Sleek and Durable Finish: Finished in an eye-catching metallic silver paint for added corrosion resistance and a stylish touch.Backed by Rough Country's 3-year Manufacturer's Warranty for peace of mind.

Features

• 10-Stage Variable Valving: Precisely tuned damping for enhanced comfort and control across varying terrain.High-Pressure Nitrogen Charged: Ensures consistent performance by reducing shock fade.35mm High-Performance Piston: Enhances stability and handling in demanding conditions.Chromed Hardened 18mm Piston Rod: Offers superior corrosion resistance and durability.54mm Shock Body: Designed for faster heat dissipation to maintain performance.36kN Tensile Strength: Built to withstand extreme impacts and heavy loads.Spring-Loaded Piston Rod Seal: Ensures a tight seal to prevent leaks and enhance longevity.Military-Spec Fluid Rated to -40 Degrees Celsius: Delivers reliable performance in extreme cold weather.Durable Rubber Bushings: Absorb vibrations and reduce noise for a smoother ride.Metallic Silver Paint: Provides a sleek finish with added corrosion resistance.3-Year Manufacturer's Warranty: Backed for peace of mind with dependable coverage.

Note: ONLY fits models equipped with 0-2.5" of suspension lift.Sold as a pair.

Installation Time: 1-2 hours

Experience superior ride quality on and off the road with Rough Country's premium N3 shocks!Enhanced Performance: Engineered with 10-stage variable valving, these shocks provide precise damping control for a smooth highway ride and confident off-road handling.Reliable Durability: The high-pressure nitrogen charge ensures consistent performance, while the durable 18mm chromed hardened piston rod resists corrosion and enhances longevity.Superior Cooling Efficiency: A robust 54mm shock body dissipates heat faster, preventing shock fade during intense use.Built to Last: With an impressive 36kN tensile strength, these shocks are designed to endure heavy impacts and challenging terrain.All-Weather Reliability: Military-spec fluid rated to -40 degrees celsius ensures dependable performance in extreme conditions.Smooth and Quiet Ride: Natural rubber bushings absorb vibrations and minimize road noise for improved comfort.Sleek and Durable Finish: Finished in an eye-catching metallic silver paint for added corrosion resistance and a stylish touch.Backed by Rough Country's 3-year Manufacturer's Warranty for peace of mind.

Features

• 10-Stage Variable Valving: Precisely tuned damping for enhanced comfort and control across varying terrain.High-Pressure Nitrogen Charged: Ensures consistent performance by reducing shock fade.35mm High-Performance Piston: Enhances stability and handling in demanding conditions.Chromed Hardened 18mm Piston Rod: Offers superior corrosion resistance and durability.54mm Shock Body: Designed for faster heat dissipation to maintain performance.36kN Tensile Strength: Built to withstand extreme impacts and heavy loads.Spring-Loaded Piston Rod Seal: Ensures a tight seal to prevent leaks and enhance longevity.Military-Spec Fluid Rated to -40 Degrees Celsius: Delivers reliable performance in extreme cold weather.Durable Rubber Bushings: Absorb vibrations and reduce noise for a smoother ride.Metallic Silver Paint: Provides a sleek finish with added corrosion resistance.3-Year Manufacturer's Warranty: Backed for peace of mind with dependable coverage.

Note: ONLY fits models equipped with 7.5-8" of suspension lift.Sold as a pair.

Installation Time: 1-2 hours

Experience superior ride quality on and off the road with Rough Country's premium N3 shocks!Enhanced Performance: Engineered with 10-stage variable valving, these shocks provide precise damping control for a smooth highway ride and confident off-road handling.Reliable Durability: The high-pressure nitrogen charge ensures consistent performance, while the durable 18mm chromed hardened piston rod resists corrosion and enhances longevity.Superior Cooling Efficiency: A robust 54mm shock body dissipates heat faster, preventing shock fade during intense use.Built to Last: With an impressive 36kN tensile strength, these shocks are designed to endure heavy impacts and challenging terrain.All-Weather Reliability: Military-spec fluid rated to -40 degrees celsius ensures dependable performance in extreme conditions.Smooth and Quiet Ride: Natural rubber bushings absorb vibrations and minimize road noise for improved comfort.Sleek and Durable Finish: Finished in an eye-catching metallic silver paint for added corrosion resistance and a stylish touch.Backed by Rough Country's 3-year Manufacturer's Warranty for peace of mind.

Features

• 10-Stage Variable Valving: Precisely tuned damping for enhanced comfort and control across varying terrain.High-Pressure Nitrogen Charged: Ensures consistent performance by reducing shock fade.35mm High-Performance Piston: Enhances stability and handling in demanding conditions.Chromed Hardened 18mm Piston Rod: Offers superior corrosion resistance and durability.54mm Shock Body: Designed for faster heat dissipation to maintain performance.36kN Tensile Strength: Built to withstand extreme impacts and heavy loads.Spring-Loaded Piston Rod Seal: Ensures a tight seal to prevent leaks and enhance longevity.Military-Spec Fluid Rated to -40 Degrees Celsius: Delivers reliable performance in extreme cold weather.Durable Rubber Bushings: Absorb vibrations and reduce noise for a smoother ride.Metallic Silver Paint: Provides a sleek finish with added corrosion resistance.3-Year Manufacturer's Warranty: Backed for peace of mind with dependable coverage.

Note: ONLY fits models equipped with 6-8" of suspension lift.Sold as a pair.

Installation Time: 1-2 hours

Experience superior ride quality on and off the road with Rough Country's premium N3 shocks!Enhanced Performance: Engineered with 10-stage variable valving, these shocks provide precise damping control for a smooth highway ride and confident off-road handling.Reliable Durability: The high-pressure nitrogen charge ensures consistent performance, while the durable 18mm chromed hardened piston rod resists corrosion and enhances longevity.Superior Cooling Efficiency: A robust 54mm shock body dissipates heat faster, preventing shock fade during intense use.Built to Last: With an impressive 36kN tensile strength, these shocks are designed to endure heavy impacts and challenging terrain.All-Weather Reliability: Military-spec fluid rated to -40 degrees celsius ensures dependable performance in extreme conditions.Smooth and Quiet Ride: Natural rubber bushings absorb vibrations and minimize road noise for improved comfort.Sleek and Durable Finish: Finished in an eye-catching metallic silver paint for added corrosion resistance and a stylish touch.Backed by Rough Country's 3-year Manufacturer's Warranty for peace of mind.

Features

• 10-Stage Variable Valving: Precisely tuned damping for enhanced comfort and control across varying terrain.High-Pressure Nitrogen Charged: Ensures consistent performance by reducing shock fade.35mm High-Performance Piston: Enhances stability and handling in demanding conditions.Chromed Hardened 18mm Piston Rod: Offers superior corrosion resistance and durability.54mm Shock Body: Designed for faster heat dissipation to maintain performance.36kN Tensile Strength: Built to withstand extreme impacts and heavy loads.Spring-Loaded Piston Rod Seal: Ensures a tight seal to prevent leaks and enhance longevity.Military-Spec Fluid Rated to -40 Degrees Celsius: Delivers reliable performance in extreme cold weather.Durable Rubber Bushings: Absorb vibrations and reduce noise for a smoother ride.Metallic Silver Paint: Provides a sleek finish with added corrosion resistance.3-Year Manufacturer's Warranty: Backed for peace of mind with dependable coverage.

Note: ONLY fits models equipped with 6.5-7.5" of suspension lift.Sold as a pair.

Installation Time: 1-2 hours

Experience superior ride quality on and off the road with Rough Country's premium N3 shocks!Enhanced Performance: Engineered with 10-stage variable valving, these shocks provide precise damping control for a smooth highway ride and confident off-road handling.Reliable Durability: The high-pressure nitrogen charge ensures consistent performance, while the durable 18mm chromed hardened piston rod resists corrosion and enhances longevity.Superior Cooling Efficiency: A robust 54mm shock body dissipates heat faster, preventing shock fade during intense use.Built to Last: With an impressive 36kN tensile strength, these shocks are designed to endure heavy impacts and challenging terrain.All-Weather Reliability: Military-spec fluid rated to -40 degrees celsius ensures dependable performance in extreme conditions.Smooth and Quiet Ride: Natural rubber bushings absorb vibrations and minimize road noise for improved comfort.Sleek and Durable Finish: Finished in an eye-catching metallic silver paint for added corrosion resistance and a stylish touch.Backed by Rough Country's 3-year Manufacturer's Warranty for peace of mind.

Features

• 10-Stage Variable Valving: Precisely tuned damping for enhanced comfort and control across varying terrain.High-Pressure Nitrogen Charged: Ensures consistent performance by reducing shock fade.35mm High-Performance Piston: Enhances stability and handling in demanding conditions.Chromed Hardened 18mm Piston Rod: Offers superior corrosion resistance and durability.54mm Shock Body: Designed for faster heat dissipation to maintain performance.36kN Tensile Strength: Built to withstand extreme impacts and heavy loads.Spring-Loaded Piston Rod Seal: Ensures a tight seal to prevent leaks and enhance longevity.Military-Spec Fluid Rated to -40 Degrees Celsius: Delivers reliable performance in extreme cold weather.Durable Rubber Bushings: Absorb vibrations and reduce noise for a smoother ride.Metallic Silver Paint: Provides a sleek finish with added corrosion resistance.3-Year Manufacturer's Warranty: Backed for peace of mind with dependable coverage.

Note: ONLY fits models equipped with 6.5-8" of suspension lift.Sold as a pair.

Installation Time: 1-2 hours

Experience superior ride quality on and off the road with Rough Country's premium N3 shocks!Enhanced Performance: Engineered with 10-stage variable valving, these shocks provide precise damping control for a smooth highway ride and confident off-road handling.Reliable Durability: The high-pressure nitrogen charge ensures consistent performance, while the durable 18mm chromed hardened piston rod resists corrosion and enhances longevity.Superior Cooling Efficiency: A robust 54mm shock body dissipates heat faster, preventing shock fade during intense use.Built to Last: With an impressive 36kN tensile strength, these shocks are designed to endure heavy impacts and challenging terrain.All-Weather Reliability: Military-spec fluid rated to -40 degrees celsius ensures dependable performance in extreme conditions.Smooth and Quiet Ride: Natural rubber bushings absorb vibrations and minimize road noise for improved comfort.Sleek and Durable Finish: Finished in an eye-catching metallic silver paint for added corrosion resistance and a stylish touch.Backed by Rough Country's 3-year Manufacturer's Warranty for peace of mind.

Features

• 10-Stage Variable Valving: Precisely tuned damping for enhanced comfort and control across varying terrain.High-Pressure Nitrogen Charged: Ensures consistent performance by reducing shock fade.35mm High-Performance Piston: Enhances stability and handling in demanding conditions.Chromed Hardened 18mm Piston Rod: Offers superior corrosion resistance and durability.54mm Shock Body: Designed for faster heat dissipation to maintain performance.36kN Tensile Strength: Built to withstand extreme impacts and heavy loads.Spring-Loaded Piston Rod Seal: Ensures a tight seal to prevent leaks and enhance longevity.Military-Spec Fluid Rated to -40 Degrees Celsius: Delivers reliable performance in extreme cold weather.Durable Rubber Bushings: Absorb vibrations and reduce noise for a smoother ride.Metallic Silver Paint: Provides a sleek finish with added corrosion resistance.3-Year Manufacturer's Warranty: Backed for peace of mind with dependable coverage.

Note: ONLY fits models equipped with 2-3.5" of suspension lift.Sold as a pair.

Installation Time: 1-2 hours

Experience superior ride quality on and off the road with Rough Country's premium N3 shocks!Enhanced Performance: Engineered with 10-stage variable valving, these shocks provide precise damping control for a smooth highway ride and confident off-road handling.Reliable Durability: The high-pressure nitrogen charge ensures consistent performance, while the durable 18mm chromed hardened piston rod resists corrosion and enhances longevity.Superior Cooling Efficiency: A robust 54mm shock body dissipates heat faster, preventing shock fade during intense use.Built to Last: With an impressive 36kN tensile strength, these shocks are designed to endure heavy impacts and challenging terrain.All-Weather Reliability: Military-spec fluid rated to -40 degrees celsius ensures dependable performance in extreme conditions.Smooth and Quiet Ride: Natural rubber bushings absorb vibrations and minimize road noise for improved comfort.Sleek and Durable Finish: Finished in an eye-catching metallic silver paint for added corrosion resistance and a stylish touch.Backed by Rough Country's 3-year Manufacturer's Warranty for peace of mind.

Features

• 10-Stage Variable Valving: Precisely tuned damping for enhanced comfort and control across varying terrain.High-Pressure Nitrogen Charged: Ensures consistent performance by reducing shock fade.35mm High-Performance Piston: Enhances stability and handling in demanding conditions.Chromed Hardened 18mm Piston Rod: Offers superior corrosion resistance and durability.54mm Shock Body: Designed for faster heat dissipation to maintain performance.36kN Tensile Strength: Built to withstand extreme impacts and heavy loads.Spring-Loaded Piston Rod Seal: Ensures a tight seal to prevent leaks and enhance longevity.Military-Spec Fluid Rated to -40 Degrees Celsius: Delivers reliable performance in extreme cold weather.Durable Rubber Bushings: Absorb vibrations and reduce noise for a smoother ride.Metallic Silver Paint: Provides a sleek finish with added corrosion resistance.3-Year Manufacturer's Warranty: Backed for peace of mind with dependable coverage.

Note: ONLY fits models equipped with 5-6.5" of suspension lift.Sold as a pair.

Installation Time: 1-2 hours

Experience superior ride quality on and off the road with Rough Country's premium N3 shocks!Enhanced Performance: Engineered with 10-stage variable valving, these shocks provide precise damping control for a smooth highway ride and confident off-road handling.Reliable Durability: The high-pressure nitrogen charge ensures consistent performance, while the durable 18mm chromed hardened piston rod resists corrosion and enhances longevity.Superior Cooling Efficiency: A robust 54mm shock body dissipates heat faster, preventing shock fade during intense use.Built to Last: With an impressive 36kN tensile strength, these shocks are designed to endure heavy impacts and challenging terrain.All-Weather Reliability: Military-spec fluid rated to -40 degrees celsius ensures dependable performance in extreme conditions.Smooth and Quiet Ride: Natural rubber bushings absorb vibrations and minimize road noise for improved comfort.Sleek and Durable Finish: Finished in an eye-catching metallic silver paint for added corrosion resistance and a stylish touch.Backed by Rough Country's 3-year Manufacturer's Warranty for peace of mind.

Features

• 10-Stage Variable Valving: Precisely tuned damping for enhanced comfort and control across varying terrain.High-Pressure Nitrogen Charged: Ensures consistent performance by reducing shock fade.35mm High-Performance Piston: Enhances stability and handling in demanding conditions.Chromed Hardened 18mm Piston Rod: Offers superior corrosion resistance and durability.54mm Shock Body: Designed for faster heat dissipation to maintain performance.36kN Tensile Strength: Built to withstand extreme impacts and heavy loads.Spring-Loaded Piston Rod Seal: Ensures a tight seal to prevent leaks and enhance longevity.Military-Spec Fluid Rated to -40 Degrees Celsius: Delivers reliable performance in extreme cold weather.Durable Rubber Bushings: Absorb vibrations and reduce noise for a smoother ride.Metallic Silver Paint: Provides a sleek finish with added corrosion resistance.3-Year Manufacturer's Warranty: Backed for peace of mind with dependable coverage.

Note: ONLY fits models equipped with 0.5-1.5" of suspension lift.Sold as a pair.

Installation Time: 1-2 hours

Experience superior ride quality on and off the road with Rough Country's premium N3 shocks!Enhanced Performance: Engineered with 10-stage variable valving, these shocks provide precise damping control for a smooth highway ride and confident off-road handling.Reliable Durability: The high-pressure nitrogen charge ensures consistent performance, while the durable 18mm chromed hardened piston rod resists corrosion and enhances longevity.Superior Cooling Efficiency: A robust 54mm shock body dissipates heat faster, preventing shock fade during intense use.Built to Last: With an impressive 36kN tensile strength, these shocks are designed to endure heavy impacts and challenging terrain.All-Weather Reliability: Military-spec fluid rated to -40 degrees celsius ensures dependable performance in extreme conditions.Smooth and Quiet Ride: Natural rubber bushings absorb vibrations and minimize road noise for improved comfort.Sleek and Durable Finish: Finished in an eye-catching metallic silver paint for added corrosion resistance and a stylish touch.Backed by Rough Country's 3-year Manufacturer's Warranty for peace of mind.

Features

• 10-Stage Variable Valving: Precisely tuned damping for enhanced comfort and control across varying terrain.High-Pressure Nitrogen Charged: Ensures consistent performance by reducing shock fade.35mm High-Performance Piston: Enhances stability and handling in demanding conditions.Chromed Hardened 18mm Piston Rod: Offers superior corrosion resistance and durability.54mm Shock Body: Designed for faster heat dissipation to maintain performance.36kN Tensile Strength: Built to withstand extreme impacts and heavy loads.Spring-Loaded Piston Rod Seal: Ensures a tight seal to prevent leaks and enhance longevity.Military-Spec Fluid Rated to -40 Degrees Celsius: Delivers reliable performance in extreme cold weather.Durable Rubber Bushings: Absorb vibrations and reduce noise for a smoother ride.Metallic Silver Paint: Provides a sleek finish with added corrosion resistance.3-Year Manufacturer's Warranty: Backed for peace of mind with dependable coverage.

Note: ONLY fits models equipped with 5.5" of suspension lift.Sold as a pair.

Installation Time: 1-2 hours

Transform your fifth-generation GMC Sierra 1500 with Rough Country's 6-Inch Suspension Lift Kit, engineered to elevate both your stance and your off-road prowess. Designed to complement the truck's aggressive factory styling, this all-in-one lift solution delivers a bold, leveled look and the clearance needed to run 35x12.50 tires on 10-inch wide wheels.Front-to-Rear Lift & Leveling: Gain a clean, aggressive stance with improved ground clearance for better trail performance and street presence.Precision Engineering, Off-Road Ready: This kit features a high-clearance crossmember that maintains optimal suspension geometry while maximizing off-road capability. Extreme-duty cast knuckles and heavy-duty fabricated blocks provide rugged durability built to endure the harshest driving conditions.Factory Fitment, Simplified Install: Enjoy a bolt-on installation that requires no strut disassembly and no differential trimming, saving you time and preserving the factory integrity of your Sierra. The laser-cut, CAD-designed components ensure a perfect fit and unmatched strength.Retains Stock Handling & Compatibility: With factory track width maintained, you keep the truck's original handling characteristics while minimizing wear and tear. This kit also works with all Rough Country shock/strut options, from nitrogen-charged N3s to the premium Vertex reservoir, so you can tailor your ride to your driving needs.Every kit includes front and rear crossmembers, a durable skid plate for enhanced chassis strength, and Rough Country's Limited Lifetime Replacement Guarantee for complete peace of mind.

Features

• Front-to-Rear Lift & Leveling: Raises and levels your vehicle for a clean, aggressive stance and improved ground clearance.\ High-Clearance Crossmember: Engineered for optimal suspension geometry and enhanced off-road capability.\ Extreme-Duty Cast Knuckles: Built tough for long-lasting durability under the harshest driving conditions.\ Maintains Factory Track Width: Preserves original handling characteristics and minimizes additional wear.\ No Strut Disassembly Required: Hassle-free installation with zero need to dismantle factory components.\ No Differential Trimming Needed: Clean bolt-on design saves time and keeps factory integrity intact.\ Laser-Cut Precision Materials: CAD-designed and CNC laser cut for a perfect fit and unmatched strength.\ Heavy-Duty Fabricated Blocks: Stronger and more durable than cast alternatives for long-term reliability.\ Fully Configurable with All Shock/Strut Options: Choose from our nitrogen-charged N3's to the premium Vertex reservoir for the perfect ride quality.

Note: Requires cutting and drilling. Does NOT fit 2019 "Classic" models. (2018 body style) Does NOT fit Denali or Denali Ultimate models as they are equipped with Adaptive Ride Control as a standard package. Does NOT fit AT4 models as it is equipped with a 2-inch factory lift. Does NOT fit AT4X models as it is equipped with a 2-inch factory lift and Multimatic DSSV dampers. Due to variances in motor weight, Rough Country's replacement strut options do NOT work on diesel models. Tire & Wheel Details Does NOT fit factory wheels. 20-inch or larger aftermarket wheels are required. Wheels must feature 4.5in backspacing to fit. Please test fit wheels prior to installation. Some aftermarket wheels may require 0.25" wheel spacer SKU: 1065.

Installation Instructions (PDF)

Transform your fifth-generation GMC Sierra 1500 with Rough Country's 6-Inch Suspension Lift Kit, engineered to elevate both your stance and your off-road prowess. Designed to complement the truck's aggressive factory styling, this all-in-one lift solution delivers a bold, leveled look and the clearance needed to run 35x12.50 tires on 10-inch wide wheels.Front-to-Rear Lift & Leveling: Gain a clean, aggressive stance with improved ground clearance for better trail performance and street presence.Precision Engineering, Off-Road Ready: This kit features a high-clearance crossmember that maintains optimal suspension geometry while maximizing off-road capability. Extreme-duty cast knuckles and heavy-duty fabricated blocks provide rugged durability built to endure the harshest driving conditions.Factory Fitment, Simplified Install: Enjoy a bolt-on installation that requires no strut disassembly and no differential trimming, saving you time and preserving the factory integrity of your Sierra. The laser-cut, CAD-designed components ensure a perfect fit and unmatched strength.Retains Stock Handling & Compatibility: With factory track width maintained, you keep the truck's original handling characteristics while minimizing wear and tear. This kit also works with all Rough Country shock/strut options, from nitrogen-charged N3s to the premium Vertex reservoir, so you can tailor your ride to your driving needs.Every kit includes front and rear crossmembers, a durable skid plate for enhanced chassis strength, and Rough Country's Limited Lifetime Replacement Guarantee for complete peace of mind.

Features

• Front-to-Rear Lift & Leveling: Raises and levels your vehicle for a clean, aggressive stance and improved ground clearance.\ High-Clearance Crossmember: Engineered for optimal suspension geometry and enhanced off-road capability.\ Extreme-Duty Cast Knuckles: Built tough for long-lasting durability under the harshest driving conditions.\ Maintains Factory Track Width: Preserves original handling characteristics and minimizes additional wear.\ No Strut Disassembly Required: Hassle-free installation with zero need to dismantle factory components.\ No Differential Trimming Needed: Clean bolt-on design saves time and keeps factory integrity intact.\ Laser-Cut Precision Materials: CAD-designed and CNC laser cut for a perfect fit and unmatched strength.\ Heavy-Duty Fabricated Blocks: Stronger and more durable than cast alternatives for long-term reliability.\ Fully Configurable with All Shock/Strut Options: Choose from our nitrogen-charged N3's to the premium Vertex reservoir for the perfect ride quality.

Note: Requires cutting and drilling. Does NOT fit 2019 "Classic" models. (2018 body style) Does NOT fit Denali or Denali Ultimate models as they are equipped with Adaptive Ride Control as a standard package. Does NOT fit AT4 models as it is equipped with a 2-inch factory lift. Does NOT fit AT4X models as it is equipped with a 2-inch factory lift and Multimatic DSSV dampers. Due to variances in motor weight, Rough Country's replacement strut options do NOT work on diesel models. Tire & Wheel Details Does NOT fit factory wheels. 20-inch or larger aftermarket wheels are required. Wheels must feature 4.5in backspacing to fit. Please test fit wheels prior to installation. Some aftermarket wheels may require 0.25" wheel spacer SKU: 1065.

Installation Instructions (PDF)

Unmatched Ride Quality On and Off the Road: Whether you're crawling over rocky terrain or cruising down city streets, Rough Country's V2 Monotube Shock Absorber delivers the control, comfort, and performance you demand. Engineered for enthusiasts who expect more from their suspension, the V2 offers a smooth, consistent ride in all conditions.Precision Monotube Design: Each shock features a premium monotube body with an Internal Floating Piston (IFP) that keeps high-pressure nitrogen and shock oil completely separate. The result? Rapid response with zero cavitation, just crisp, fade-free damping at every bump, dip, and obstacle.High-Performance Construction: Equipped with a massive 46mm high-flow piston, the V2 ensures superior fluid control and long-term durability. The nitrogen-charged design minimizes aeration for improved handling and stability during aggressive use.Striking Style Meets Superior Strength: Crafted from lightweight T6061 brushed aluminum and finished with black anodized accents, the V2 not only resists corrosion and dissipates heat faster, it also turns heads with its rugged, modern look.Engineered for Longevity: With 36kN tensile strength and an inverted mounting design to protect vital components, the V2 is built to withstand harsh environments and hard-hitting trails without compromise.\ Peace of Mind Included: Each V2 Monotube Shock Absorber is backed by a 3-year manufacturer's warranty, ensuring long-term confidence in every ride.

Features

• Incredible Ride Quality & Performance: Engineered for maximum control, comfort, and consistency on any terrain.\ Monotube Design: Delivers superior damping and instant response under dynamic driving conditions.\ Internal Floating Piston (IFP): Separates gas and oil for fade-free performance and consistent handling.\ Nitrogen-Charged: Reduces aeration and improves shock performance during intense use.\ 46mm High-Flow Piston: Increases fluid capacity for quicker response and smoother ride.\ Rapid Heat Dissipation: Prevents overheating to maintain reliable performance on rough terrain.\ 36kN Tensile Strength: Built to handle extreme off-road forces with unmatched durability.\ Inverted Mounting Design: Protects shock body and shaft from debris for longer life.\ T6061 Brushed Aluminum Body: Lightweight, corrosion-resistant housing with rugged appeal.\ Backed by a 3-Year Manufacturer's Warranty: Buy with confidence knowing you're covered.

Note: Sold in pairs.

Installation Time: 1-2 hours

Unmatched Ride Quality On and Off the Road: Whether you're crawling over rocky terrain or cruising down city streets, Rough Country's V2 Monotube Shock Absorber delivers the control, comfort, and performance you demand. Engineered for enthusiasts who expect more from their suspension, the V2 offers a smooth, consistent ride in all conditions.Precision Monotube Design: Each shock features a premium monotube body with an Internal Floating Piston (IFP) that keeps high-pressure nitrogen and shock oil completely separate. The result? Rapid response with zero cavitation, just crisp, fade-free damping at every bump, dip, and obstacle.High-Performance Construction: Equipped with a massive 46mm high-flow piston, the V2 ensures superior fluid control and long-term durability. The nitrogen-charged design minimizes aeration for improved handling and stability during aggressive use.Striking Style Meets Superior Strength: Crafted from lightweight T6061 brushed aluminum and finished with black anodized accents, the V2 not only resists corrosion and dissipates heat faster, it also turns heads with its rugged, modern look.Engineered for Longevity: With 36kN tensile strength and an inverted mounting design to protect vital components, the V2 is built to withstand harsh environments and hard-hitting trails without compromise.\ Peace of Mind Included: Each V2 Monotube Shock Absorber is backed by a 3-year manufacturer's warranty, ensuring long-term confidence in every ride.

Features

• Incredible Ride Quality & Performance: Engineered for maximum control, comfort, and consistency on any terrain.\ Monotube Design: Delivers superior damping and instant response under dynamic driving conditions.\ Internal Floating Piston (IFP): Separates gas and oil for fade-free performance and consistent handling.\ Nitrogen-Charged: Reduces aeration and improves shock performance during intense use.\ 46mm High-Flow Piston: Increases fluid capacity for quicker response and smoother ride.\ Rapid Heat Dissipation: Prevents overheating to maintain reliable performance on rough terrain.\ 36kN Tensile Strength: Built to handle extreme off-road forces with unmatched durability.\ Inverted Mounting Design: Protects shock body and shaft from debris for longer life.\ T6061 Brushed Aluminum Body: Lightweight, corrosion-resistant housing with rugged appeal.\ Backed by a 3-Year Manufacturer's Warranty: Buy with confidence knowing you're covered.

Note: Sold in pairs.

Installation Time: 1-2 hours

Unmatched Ride Quality On and Off the Road: Whether you're crawling over rocky terrain or cruising down city streets, Rough Country's V2 Monotube Shock Absorber delivers the control, comfort, and performance you demand. Engineered for enthusiasts who expect more from their suspension, the V2 offers a smooth, consistent ride in all conditions.Precision Monotube Design: Each shock features a premium monotube body with an Internal Floating Piston (IFP) that keeps high-pressure nitrogen and shock oil completely separate. The result? Rapid response with zero cavitation, just crisp, fade-free damping at every bump, dip, and obstacle.High-Performance Construction: Equipped with a massive 46mm high-flow piston, the V2 ensures superior fluid control and long-term durability. The nitrogen-charged design minimizes aeration for improved handling and stability during aggressive use.Striking Style Meets Superior Strength: Crafted from lightweight T6061 brushed aluminum and finished with black anodized accents, the V2 not only resists corrosion and dissipates heat faster, it also turns heads with its rugged, modern look.Engineered for Longevity: With 36kN tensile strength and an inverted mounting design to protect vital components, the V2 is built to withstand harsh environments and hard-hitting trails without compromise.\ Peace of Mind Included: Each V2 Monotube Shock Absorber is backed by a 3-year manufacturer's warranty, ensuring long-term confidence in every ride.

Features

• Incredible Ride Quality & Performance: Engineered for maximum control, comfort, and consistency on any terrain.\ Monotube Design: Delivers superior damping and instant response under dynamic driving conditions.\ Internal Floating Piston (IFP): Separates gas and oil for fade-free performance and consistent handling.\ Nitrogen-Charged: Reduces aeration and improves shock performance during intense use.\ 46mm High-Flow Piston: Increases fluid capacity for quicker response and smoother ride.\ Rapid Heat Dissipation: Prevents overheating to maintain reliable performance on rough terrain.\ 36kN Tensile Strength: Built to handle extreme off-road forces with unmatched durability.\ Inverted Mounting Design: Protects shock body and shaft from debris for longer life.\ T6061 Brushed Aluminum Body: Lightweight, corrosion-resistant housing with rugged appeal.\ Backed by a 3-Year Manufacturer's Warranty: Buy with confidence knowing you're covered.

Note: Sold in pairs.

Installation Time: 1-2 hours

Give the front-end of your GMC 1500 a unique look with Rough CountryΓÇÖs Mesh Grille kit. This grille replacement kit swaps out your stock grille with the eye-catching, head-turning good looks of this aftermarket upgrade. With a unique, laser-cut mesh pattern surrounded by stylish, stainless steel rivets, this grill gives your truck a more menacing look thatΓÇÖs sure to draw attention. Each kit is powdercoated black to resist corrosion and give a long lifespan of good looks.This kit features a Rough Country's 30ΓÇ¥ Curved Dual-Row Black-Series LED light bar with Cree LED's outputting a staggering 14,400 Lumens and 180 Watts of lighting power. Includes a mountable on/off switch, wiring harness, and our 3 Year Warranty!

Features

• Unique Mesh Pattern\ Corrosion Resistant Black Powdercoat \ Stainless Steel Hardware\ Limited lifetime warranty\ \ \ Optional Black Series\ \ 14400 lumens\ 180 watts\ Contains 60, 3 watt LEDs\ 8 degree spot / 90 degree flood combo\ Black panel design\ IP67 Waterproof rating\ 3-year Manufacturer's Warranty\ \ \ \ Optional Black Series DRL\ \ 27000 lumens\ 300 watts\ Contains 60, 5 watt LEDs\ Contains 30, cool white daytime running light LEDs\ 8 degree spot / 60 degree flood combo\ Black panel design\ 3-year Manufacturer's Warranty\ \

Note: Requires cutting and drilling. Replaces factory grille. LED Light Bar is for off-road use ONLY. Fits 14-15 GMC 1500 ONLY. California Residents: Prop65 Warning

Installation Instructions (PDF)

Give the front-end of your GMC 1500 a unique look with Rough CountryΓÇÖs Mesh Grille kit. This grille replacement kit swaps out your stock grille with the eye-catching, head-turning good looks of this aftermarket upgrade. With a unique, laser-cut mesh pattern surrounded by stylish, stainless steel rivets, this grill gives your truck a more menacing look thatΓÇÖs sure to draw attention. Each kit is powdercoated black to resist corrosion and give a long lifespan of good looks.This kit features a Rough Country's 30ΓÇ¥ Curved Dual-Row Black-Series LED light bar with Cree LED's outputting a staggering 14,400 Lumens and 180 Watts of lighting power. Includes a mountable on/off switch, wiring harness, and our 3 Year Warranty!

Features

• Unique Mesh Pattern\ Corrosion Resistant Black Powdercoat \ Stainless Steel Hardware\ Limited lifetime warranty\ \ \ Optional Black Series\ \ 14400 lumens\ 180 watts\ Contains 60, 3 watt LEDs\ 8 degree spot / 90 degree flood combo\ Black panel design\ IP67 Waterproof rating\ 3-year Manufacturer's Warranty\ \ \ \ Optional Black Series DRL\ \ 27000 lumens\ 300 watts\ Contains 60, 5 watt LEDs\ Contains 30, cool white daytime running light LEDs\ 8 degree spot / 60 degree flood combo\ Black panel design\ 3-year Manufacturer's Warranty\ \

Note: Requires cutting and drilling. Replaces factory grille. LED Light Bar is for off-road use ONLY. Fits 14-15 GMC 1500 ONLY. California Residents: Prop65 Warning

Installation Instructions (PDF)

Give the front-end of your GMC 1500 a unique look with Rough CountryΓÇÖs Mesh Grille kit. This grille replacement kit swaps out your stock grille with the eye-catching, head-turning good looks of this aftermarket upgrade. With a unique, laser-cut mesh pattern surrounded by stylish, stainless steel rivets, this grill gives your truck a more menacing look thatΓÇÖs sure to draw attention. Each kit is powdercoated black to resist corrosion and give a long lifespan of good looks.This kit features a Rough Country's 30ΓÇ¥ Curved Dual-Row Black-Series LED light bar with Cree LED's outputting a staggering 14,400 Lumens and 180 Watts of lighting power. Includes a mountable on/off switch, wiring harness, and our 3 Year Warranty!

Features

• Unique Mesh Pattern\ Corrosion Resistant Black Powdercoat \ Stainless Steel Hardware\ Limited lifetime warranty\ \ \ Optional Black Series\ \ 14400 lumens\ 180 watts\ Contains 60, 3 watt LEDs\ 8 degree spot / 90 degree flood combo\ Black panel design\ IP67 Waterproof rating\ 3-year Manufacturer's Warranty\ \ \ \ Optional Black Series DRL\ \ 27000 lumens\ 300 watts\ Contains 60, 5 watt LEDs\ Contains 30, cool white daytime running light LEDs\ 8 degree spot / 60 degree flood combo\ Black panel design\ 3-year Manufacturer's Warranty\ \

Note: Requires cutting and drilling. Replaces factory grille. LED Light Bar is for off-road use ONLY. Fits 14-15 GMC 1500 ONLY. California Residents: Prop65 Warning

Installation Instructions (PDF)

Improved Ground Clearance and Ride Quality. Give your GMC Acadia increased ride height and a more aggressive appearance with Rough Country’s 1.5in Suspension Lift! From the factory, the GMC Acadia sits lower in the front than the rear, creating a nose-down look that leaves a lot to be desired.\ Innovative Design and Construction. From the factory, the GMC Acadia sits lower in the front than the rear, creating a nose-down look that leaves a lot to be desired. This easy-to-install kit features a set of front upper-strut and preload spacers to lift the front of your vehicle for a level look from front to rear and enough ride height to run larger tires for a more aggressive appearance.\ Installation. With a no-cut or drilling required to install, installation couldn't be easier. With an estimated timeframe of 3-4 hours, this full kit can be installed can be completed efficiently and quickly!\ Limited Lifetime Replacement Warranty. Rough Country’s 1.5in Suspension Lift is backed with a limited lifetime replacement warranty towards manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty give yourself peace of mind when using Rough Country's Suspension products! \  

Features

• Levels front with rear.\ Offers increased ground clearance.\ Allows for larger tires.\ Includes camber bolts to retain proper alignment specs.

Note: Requires strut disassembly. Does NOT work on models with adaptive ride control.

Installation Time: 3-4 hours

Installation Instructions (PDF)