• Easy bolt-on installation
• Increased ground clearance
• Clears up to 35" tires
• Factory tuned coil springs are based on the stock spring rate

• Does NOT fit 4-door (Unlimited) models.
• If planning on running 35" tires on factory wheels, double check clearance between the front tire, lower control arm and sway-bar links.
• 2012-2018 models require exhaust modifications to clear the front driveshaft (#1030)

VEHICLE FITMENT

• Easy bolt-on installation
• Increased ground clearance
• Control arm drop brackets promote optimum geometry for smooth handling & ride quality
• Coil correction plates correct the rear coil spring angle by 10 degrees, allowing them to function more effeciently.
• Factory tuned coil springs are based on the stock spring rate
• Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use.

• Does NOT fit 4-door (Unlimited) models.
• 2012-2018 models require exhaust modifications to clear the front driveshaft (#1030)
• On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.

VEHICLE FITMENT

• Easy bolt-on installation
• Increased ground clearance
• Coil correction plates correct the rear coil spring angle by 10 degrees, allowing them to function more effeciently.

• Does NOT fit 4-door (Unlimited) models.
• 2012-2018 models require exhaust modifications to clear the front driveshaft (#1030)
• On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.

VEHICLE FITMENT

• Easy bolt-on installation
• Increased ground clearance
• Levels the front with the rear of the vehicle
• Front adjustable track bar is made of forged solid steel for unsurpassed strength and durability
• Coil correction plates correct the rear coil spring angle by 10 degrees, allowing them to function more effeciently.
• Includes our Premium N3 shock absorbers.
• X-Flex control arm features:
• Clevite brand OEM style rubber bushings.
• Flex joints feature a massive 2.5" diameter body and 1.25" thread.
• Fully greasable.

• Does NOT fit 4-door (Unlimited) models.
• 2012-2018 models require exhaust modifications to clear the front driveshaft (#1030)
• On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.

VEHICLE FITMENT

• Incredible on and off-road ride quality
• No welding required
• True 4-link setup with new, longer travel arms
• Prevents binding and rear-steer
• Front adjustable track bar is made of forged solid steel for unsurpassed strength and durability
• Includes our premium N3 shock absorbers
• Coil correction plates correct the rear coil spring angle by 10 degrees, allowing them to function more effeciently.
• Gain unparalelled axle flex while keeping pinion angles optimized
• X-Flex control arm features:
• durable OEM style rubber bushings.
• Flex joints are fully rebuildable.
• Flex joints feature a massive 2.5" diameter body and 1.25" thread.
• Fully greasable.

• Does NOT fit 4-door models.

VEHICLE FITMENT