Sway-bar quick disconnects give your Jeep better articulation off road with the pull of a pin, but allows you to keep on road handling and stability. Our new links fold up and secure out of the way when not in use.

Features

• Easy bolt-on installation\ Easily secured away when not in use.\ Allows for greater articulation off-road.\ Quick pull of the pin and you're trail ready.

Note: ONLY fits models with 4in - 6in of suspension lift.

Installation Time: 1-2 hours

Installation Instructions (PDF)

Run your rear coils at the right angle; these shims correct the rear coil angle of a lifted TJ by 10 degrees, thus putting them at the optimum angle for on and off-road applications. A bowed coil spring can rub against the track-bar bracket or other components. Utilizing a correction shim keeps the coil straight, thus prolonging the life of the coil itself as well as giving a more pleasurable driving experience.

Features

• Easy bolt-on installation\ Corrects the rear coil angle 10 degrees.\ Allows coil springs to function more efficiently.

Installation Time: 2-3 hours

Installation Instructions (PDF)

Clamps to the rear axle to ensure the coil does not separate from the axle under heavy articulation.

Features

• Easy bolt-on installation\ Can be used with stock or lifted rear coil springs.\ Ensures the rear coils do not separate from the axle under heavy articulation.

Installation Time: 1-2 hours

Installation Instructions (PDF)

Sway-bar quick disconnects give your Jeep better articulation off road with the pull of a pin, but allows you to keep on road handling and stability. Our new links fold up and secure out of the way when not in use.

Features

• Easy bolt-on installation\ Easily secured away when not in use.\ Allows for greater articulation off-road.\ Quick pull of the pin and you're trail ready.

Note: ONLY fits models with 3in - 6in of suspension lift.

Installation Time: 1-2 hours

Installation Instructions (PDF)

Upgrade your engine bay experience with Rough Country's Hydraulic Hood Assist for Jeep TJ and LJ models. Say goodbye to the hassle of dealing with a prop rod, this kit makes lifting your hood smooth, safe, and effortless.Gas-Charged Performance: A pair of high-quality gas-charged struts automatically lift and hold your hood open, eliminating the need to fumble with the factory prop rod or risk resting the hood against your windshield.Clean, Branded Look: Featuring a custom "RC" branded mounting bracket, this system adds a sharp, finished appearance to your engine bay while keeping functionality at the forefront.Quick Installation: Installs in as little as 10 minutes with basic hand tools. Requires only minor drilling to enlarge pre-existing holes, no cutting or complicated modifications needed.Rough Country's Hydraulic Hood Assist is the practical upgrade you didn't know you needed, until you try it. Built for convenience, safety, and style all in one sleek package.

Features

• Straightforward Installation: Requires only minor drilling to enlarge pre-existing holes, no cutting or complex modifications needed.\ Enhanced Safety and Convenience: Eliminates the hassle of the factory prop rod and protects the windshield from hood contact.\ RC-Branded Mounting Brackets: Features custom "RC" logo brackets for a clean, professional appearance under the hood.\ Hands-Free Hood Operation: Gas-charged struts securely hold the hood open for easier maintenance and inspections.\ Protects Hood and Windshield: Prevents accidental slippage or windshield contact, reducing potential damage.\ Fast Access to Engine Bay: Makes it quicker and easier to check fluids, change parts, or perform general maintenance.\ Durable Construction: Built from quality components engineered to withstand frequent use and rugged conditions.\ Vehicle-Specific Design: Engineered specifically for Jeep TJ and LJ models for a precise fit and optimal performance.

Note: Hood assist bracket will be installed above the third hole from the bottom on the center hood bracket.

Installation Time: 10 minutes

Installation Instructions (PDF)

Our lift shackles are constructed of 3/8in thick steel. All corners are rounded to avoid interference problems. New grade 8 hardware is included with each shackle lift, along with detailed instructions. Sold in Pairs.

Features

• Easy bolt-on installation.\ Increased ground clearance.\ Allows springs more movement and articulation.\ Features rounded corners to avoid interference problems.\ Sold in pairs.

Installation Time: 2-3 hours

Installation Instructions (PDF)

Our lift shackles are constructed of 3/8in thick steel. All corners are rounded to avoid interference problems. New grade 8 hardware is included with each shackle lift, along with detailed instructions. Sold in Pairs.

Features

• Easy bolt-on installation.\ Increased ground clearance.\ Allows springs more movement and articulation.\ Features rounded corners to avoid interference problems.\ Sold in pairs.

Installation Time: 2-3 hours

Installation Instructions (PDF)

Bar Pin Eliminators eliminate rattle and thumping sound you hear from the floorboard. This kit allows the bushings to fill the shock loop eye completely in the front lower shock mount, reducing any irritating noises.

Features

• Easy bolt-on installation\ Stronger mount than the factory bar pin setup.\ Eliminates rattling noises produced by the factory bar pin mount.\ Replaces the front lower bar pin shock mount.

Note: Will NOT work on shocks equipped with a bonded barpin/bushing.

Installation Time: 1-2 hours

Installation Instructions (PDF)

Raises the rear track bar to perfectly center the rear axle under your Jeep TJ.

Features

• Easy bolt-on installation\ Helps to perfectly center your Jeep's rear axle.

Note: ONLY fits models with 2.5in of suspension lift.

Installation Time: 1 hours

Installation Instructions (PDF)

After lifting your vehicle it is highly recommended to install a drop pitman arm to correct the vehicles steering geometry. Due to the increased height, a vehicles turning radius can be affected. The drop steering arm is specifically engineered for lifted applications and is a simple solution to correct draglink alignment and reduces steering vibration.

Features

• Maintains proper draglink alignment.\ Maintains optimum turning radius.\ Helps reduce steering vibrations.

Note: ONLY fits power steering models. ONLY fits models with 6in - 7in suspension lift kits.

Installation Time: 2-3 hours

Installation Instructions (PDF)

After lifting your vehicle it is highly recommended to install a drop pitman arm to correct the vehicles steering geometry. Due to the increased height, a vehicles turning radius can be affected. The drop steering arm is specifically engineered for lifted applications and is a simple solution to correct draglink alignment and reduces steering vibration.

Features

• Maintains proper draglink alignment.\ Maintains optimum turning radius.\ Helps reduce steering vibrations.

Note: ONLY fits manual steering models. ONLY fits models with 2.5in - 4in suspension lift kits.

Installation Time: 2-3 hours

Installation Instructions (PDF)

After lifting your vehicle it is highly recommended to install a drop pitman arm to correct the vehicles steering geometry. Due to the increased height, a vehicles turning radius can be affected. The drop steering arm is specifically engineered for lifted applications and is a simple solution to correct draglink alignment and reduces steering vibration.

Features

• Maintains proper draglink alignment.\ Maintains optimum turning radius.\ Helps reduce steering vibrations.

Note: ONLY fits power steering models. ONLY fits models with 2.5in - 4in suspension lift kits.

Installation Time: 2-3 hours

Installation Instructions (PDF)

After lifting your vehicle, installing a drop pitman arm is highly recommended to maintain proper steering geometry. Increased height can affect your vehicleΓÇÖs maneuverability, but this drop steering arm is specifically engineered for lifted applications. It ensures proper draglink alignment for improved handling, preserves your optimum turning radius for precise control, and helps reduce steering vibrations for a smoother, more stable driving experience.

Features

• Proper Draglink Alignment: Keeps your steering geometry in check for improved handling and stability.\ Optimum Turning Radius: Preserves factory maneuverability for tight turns and precise control.\ Reduced Steering Vibrations: Minimizes unwanted feedback for a smoother, more controlled driving experience.

Note: ONLY fits power steering models. ONLY fits Jeep TJ models with 2.5in - 6in suspension lift kits. ONLY fits Jeep YJ models with 2.5in - 4in suspension lift kits. ONLY fits Jeep XJ & MJ models with 4.5in - 6.5in suspension lift kits.

Installation Time: 2-3 hours

Installation Instructions (PDF)

After lifting your vehicle it is highly recommended to install a drop pitman arm to correct the vehicles steering geometry. Due to the increased height, a vehicles turning radius can be affected. The drop steering arm is specifically engineered for lifted applications and is a simple solution to correct draglink alignment and reduces steering vibration.

Features

• Maintains proper draglink alignment.\ Maintains optimum turning radius.\ Helps reduce steering vibrations.

Note: ONLY fits models with 3.5in - 6in suspension lift kits. ONLY fits power steering models

Installation Time: 2-3 hours

Installation Instructions (PDF)

After lifting your vehicle it is highly recommended to install a drop pitman arm to correct the vehicles steering geometry. Due to the increased height, a vehicles turning radius can be affected. The drop steering arm is specifically engineered for lifted applications and is a simple solution to correct draglink alignment and reduces steering vibration.

Features

• Maintains proper draglink alignment.\ Maintains optimum turning radius.\ Helps reduce steering vibrations.

Note: ONLY fits Ford models with 3in - 6in of suspension lift. ONLY fits Jeep models with 2.5in - 4in of suspension lift. ONLY fits models with power steering.

Installation Time: 2-3 hours

Installation Instructions (PDF)

Our lift shackles are constructed of 3/8in thick steel. All corners are rounded to avoid interference problems. New grade 8 hardware is included with each shackle lift, along with detailed instructions. Sold in Pairs.

Features

• Easy bolt-on installation.\ Increased ground clearance.\ Allows springs more movement and articulation.\ Features rounded corners to avoid interference problems.\ Gain 1 1/4in front or rear lift on Jeep YJ models.\ Gain 1 3/4in rear lift on Jeep CJ models.

Note: Sold in pairs. Works for front or rear lift on Jeep YJ models. Works for rear lift on Jeep CJ models.

Installation Time: 2-3 hours

Installation Instructions (PDF)

Improved Performance. If you're looking for a simple, no-hassle solution for your Jeep Cherokee XJ that will bring new life to your suspension system, the Rear Lift Shackles from Rough Country will get the job done. These Lift Shackle brackets help fine-tune the rear of your XJ suspension for smoother off-road use and maximum stability, allowing you to take your vehicle through various terrains with ease. Sold in pairs, they complement any lift you may have in the front end, allowing you to gain up to an extra 2-inches of lift in the rear of your XJ. This simple bolt-on application is a breeze thanks to detailed instructions included with every kit and is covered by our limited lifetime warranty.

Features

• Easy bolt-on installation.\ Fine tune the rear suspension of your XJ.\ Gain up to an extra 2in of lift for the rear of your XJ.\ 2 hole adjustment.

Installation Time: .75 hours

There's an easier way to get the right angles after lifting your Jeep TJ, thanks to Rough Country's new TJ Track Rod Bracket. This heavy duty bracket lets you keep your track rod in the stock location on the axle. Utilizing this bracket alleviates the task of drilling a new axle mount point so close to the original, meaning a faster and easier install with more peace of mind. This kit works perfectly with a stock track bar on a 4in lift, or an adjustable, factory-style track bar on 6in lifts. This kit also includes an extended pitman arm, allowing you to drop the drag link thus promoting a longer lifespan for tie rod ends - a common weak point on lifted Jeeps. Made with durable 1/4in plate steel, the TJ Track Rod Bracket is ready to protect at all times, even under intense off-road action.

Features

• Easy bolt-on installation\ Allows track bar to remain in the stock mounting location on the axle.\ Alleviates drilling new axle mount point with 4in or 6in lifts.\ Drop pitman arm promotes longer lifespan for tie rod ends.

Note: Fits 4in lifted TJ models equipped with the stock front track bar. Fits 6in lifted TJ models equipped with a factory style adjustable front track bar.

Installation Time: 1-2 hours

Installation Instructions (PDF)

Upgrade your worn out rubber brake lines with Rough Country's Stainless Extended Steel Brake Line Kit. Our DOT approved brake line kits offer the necessary extra length to install your application, perfect for anyone who wants to swap out poor performing or decaying factory brake lines.Rough Country's Stainless Steel replacements offer superior protection and a seriously long lifespan. A braided stainless steel exterior keeps your lines free from off-road debris, rocks, and mud that can penetrate factory rubber lines. This durable outer layer also prevents expansion of the internal Teflon layer - even under 4,000PSI - keeping fluid moving to the brake line for a noticeably firmer brake pedal feel. High-quality hollow fasteners at both ends of each brake line provide a leak-free flow path.\ s at both ends of each brake line provide a leak-free flow path.

Features

• Length: 25in

Note: ONLY fits models with 4-6in of suspension lift.

Installation Time: 2-3 hours

Installation Instructions (PDF)

Upgrade your worn out rubber brake lines with Rough Country's Stainless Extended Steel Brake Line Kit. Our DOT approved brake line kits offer the necessary extra length to install your application, perfect for anyone who wants to swap out poor performing or decaying factory brake lines.Rough Country's Stainless Steel replacements offer superior protection and a seriously long lifespan. A braided stainless steel exterior keeps your lines free from off-road debris, rocks, and mud that can penetrate factory rubber lines. This durable outer layer also prevents expansion of the internal Teflon layer - even under 4,000PSI - keeping fluid moving to the brake line for a noticeably firmer brake pedal feel. High-quality hollow fasteners at both ends of each brake line provide a leak-free flow path.\ s at both ends of each brake line provide a leak-free flow path.

Features

• Length: 25in

Note: ONLY fits models with 4-6in of suspension lift.

Installation Time: 2-3 hours

Installation Instructions (PDF)

Upgrade your worn out rubber brake lines with Rough Country's Stainless Extended Steel Brake Line Kit. Our DOT approved brake line kits offer the necessary extra length to install your application, perfect for anyone who wants to swap out poor performing or decaying factory brake lines.Rough Country's Stainless Steel replacements offer superior protection and a seriously long lifespan. A braided stainless steel exterior keeps your lines free from off-road debris, rocks, and mud that can penetrate factory rubber lines. This durable outer layer also prevents expansion of the internal Teflon layer - even under 4,000PSI - keeping fluid moving to the brake line for a noticeably firmer brake pedal feel. High-quality hollow fasteners at both ends of each brake line provide a leak-free flow path.\ s at both ends of each brake line provide a leak-free flow path.

Features

• Length: 23.75in\ Compatible on models with 4-6in of suspension lift.

Note: ONLY fits models with 4-6in of suspension lift.

Installation Instructions (PDF)

Note: For use with the front lower control arms ONLY.

Installation Time: 1 hours

Our lift shackles are constructed of 3/8in thick steel. All corners are rounded to avoid interference problems. New grade 8 hardware is included with each shackle lift, along with detailed instructions. Sold in Pairs.

Features

• Easy bolt-on installation.\ Increased ground clearance.\ Features rounded corners to avoid interference problems.\ Sold in pairs.

Installation Time: 2-3 hours

Installation Instructions (PDF)

Our lift shackles are constructed of 3/8in thick steel. All corners are rounded to avoid interference problems. New grade 8 hardware is included with each shackle lift, along with detailed instructions. Sold in Pairs.

Features

• Easy bolt-on installation.\ Increased ground clearance.\ Features rounded corners to avoid interference problems.\ Gain 1 1/4in front lift on Jeep YJ models.\ Gain 1 3/4in rear lift on Jeep CJ models.

Note: Sold in pairs. Works for front lift on Jeep YJ models. Works for rear lift on Jeep CJ models.

Installation Time: 2-3 hours

Installation Instructions (PDF)

Our lift shackles are constructed of 3/8in thick steel. All corners are rounded to avoid interference problems. New grade 8 hardware is included with each shackle lift, along with detailed instructions. Sold in Pairs.

Features

• Easy bolt-on installation.\ Increased ground clearance.\ Features rounded corners to avoid interference problems.\ Sold in pairs.

Installation Time: 2-3 hours

Installation Instructions (PDF)

Our lift shackles are constructed of 3/8in thick steel. All corners are rounded to avoid interference problems. New grade 8 hardware is included with each shackle lift, along with detailed instructions. Sold in Pairs.

Features

• Easy bolt-on installation.\ Increased ground clearance.\ Features rounded corners to avoid interference problems.\ Gain 1in front or rear lift on Jeep YJ models.\ Gain 1 3/8in rear lift on Jeep CJ models.\ Sold in pairs.

Installation Time: 2-3 hours

Installation Instructions (PDF)

With their ball-in joint, massive 2.5in diameter body, and huge 1.25in threads, these X-Flex Joints offer considerable range, strength, and safety for off-road applications. Upper Arm X-Flex Joints pivot up to twenty degrees, while Lower Arm Joints are capable of a staggering thirty-five degrees pivot range.

Features

• Fully greasable.\ Upper joints pivot up to 20 degrees.\ Lower joints pivot up to 35 degrees.\ Allows for greater articulation off-road.

Note: Recommended for models with 0in - 6.5in suspension lift kits. Fits Jeep TJ, ZJ, XJ and MJ front lower control arms. Fits Jeep TJ, ZJ rear lower control arms.

Installation Time: 3-4 hours

With their ball-in joint, massive 2.5in diameter body, and huge 1.25in threads, these X-Flex Joints offer considerable range, strength, and safety for off-road applications. Upper Arm X-Flex Joints pivot up to twenty degrees, while Lower Arm Joints are capable of a staggering thirty-five degrees pivot range.

Features

• Fully greasable.\ Increased longevity.\ Upper joints pivot up to 20 degrees.\ Lower joints pivot up to 35 degrees.\ Allows for greater articulation off-road.

Note: Recommended for models with 0in - 6in suspension lift kits.

Installation Time: 3-4 hours

With their ball-in joint, massive 2.5in diameter body, and huge 1.25in threads, these X-Flex Joints offer considerable range, strength, and safety for off-road applications. Upper Arm X-Flex Joints pivot up to twenty degrees, while Lower Arm Joints are capable of a staggering thrity-five degrees pivot range.

Features

• Fully greasable.\ Upper joints pivot up to 20 degrees.\ Lower joints pivot up to 35 degrees.\ Allows for greater articulation off-road.

Note: Recommended for models with 0in - 6in suspension lift kits.

Installation Time: 3-4 hours

With their ball-in joint, massive 2.5in diameter body, and huge 1.25in threads, these X-Flex Joints offer considerable range, strength, and safety for off-road applications. Upper Arm X-Flex Joints pivot up to twenty degrees, while Lower Arm Joints are capable of a staggering thrity-five degrees pivot range.

Features

• Fully greasable.\ Upper joints pivot up to 20 degrees.\ Lower joints pivot up to 35 degrees.\ Allows for greater articulation off-road.

Installation Time: 3-4 hours