Rough Country's new Class III hitch installs into the factory location eliminating the factory tow hook.

Features

• Easy bolt-on installation\ Allows you to pull a trailer with this 2in receiver.

Note: Does NOT fit EcoDiesel models.

Installation Time: .5 hours

Installation Instructions (PDF)

Bar Pin Eliminators eliminate rattle and thumping sound you hear from the floorboard. This kit allows the bushings to fill the shock loop eye completely in the rear upper shock mount, reducing any irritating noises.

Features

• Easy bolt-on installation\ Stronger mount than the factory bar pin setup.\ Eliminates rattling noises produced by the factory bar pin mount.\ Replaces the rear upper bar pin shock mount.

Note: Will NOT work on shocks equipped with a bonded barpin/bushing.

Installation Time: 1-2 hours

Installation Instructions (PDF)

After lifting your vehicle it is highly recommended to install a drop pitman arm to correct the vehicles steering geometry. Due to the increased height, a vehicles turning radius can be affected. The drop steering arm is specifically engineered for lifted applications and is a simple solution to correct draglink alignment and reduces steering vibration.

Features

• Fits 4in Lifts\ Maintains proper draglink alignment.\ Maintains optimum turning radius.\ Helps reduce steering vibrations.

Note: ONLY fits models with 4in suspension lift kits.

Installation Time: 2-3 hours

Installation Instructions (PDF)

This kit is used to lower the upper and lower control arm mounting points when the XJ Cherokee is lifted at least 4.5in. Lowering the control arm mounting points reduces the arms angles and substantially improves ride quality and handling.

Features

• Easy bolt-on installation.\ Reduces control arm angle.\ Improves ride quality and handling.

Note: For use on models with at least 4.5in of suspension lift. Minor drilling is required.

Installation Time: 3-4 hours

Installation Instructions (PDF)

Save yourself time and effort when installing your new suspension with NEW spring bolts or replace those old rusty bolts with Grade 8 hardware.

Installation Time: 1-2 hours

This double cardan style CV drive shaft is recommended for Jeep XJ Cherokee models equipped with 4in - 6in suspension lifts to prevent driveline vibration and the rear output shaft from breaking.

Features

• Collapsed Measurement: 31.75-inches\ Extended Measurement: 35.25-inches\ After lifting your Jeep XJ Cherokee a CV (Double Cardan) drive shaft is a good choice to eliminate vibration issues and provide the longest lasting drive shaft.\ Includes better quality CV joints.\ Shaft strength is twice as strong as the factory equipped drive shaft.\

Note: A Slip Yoke Eliminator is REQUIRED. Recommended on models with 4in - 6in of lift.

Installation Time: 2-3 hours

Installation Instructions (PDF)

Fix a Known Weak Point: Jeep models equipped with NP231 transfer cases share one common vulnerability. The factory slip yoke rear output shaft. While adequate for stock street use, this design quickly becomes a liability once suspension lifts and larger tires are added, increasing stress on the rear output shaft and driveline components.Built for Lifted Performance: Rough Country's Heavy Duty Slip Yoke Eliminator Kit replaces the factory slip yoke with a fixed yoke design to dramatically improve driveline strength and reliability. By correcting driveline angles, this upgrade helps eliminate vibrations caused by suspension lifts while allowing the use of a double cardan CV driveshaft for smoother on-road driving and improved off-road performance.Trail-Ready Durability You Can Trust: Constructed from high-strength materials, this kit is engineered to handle the added load and abuse that lifted Jeeps encounter on and off the trail. This kit includes everything needed to properly modify your transfer case and requires Rough Country's extended travel driveshaft, which helps prevent driveline vibration and protects the rear output shaft from failure.

Features

• Improved Driveline Strength: Converts the factory slip yoke to a fixed yoke design for increased driveline durability and reliability under load.\ Eliminates Driveline Vibration: Reduces vibrations commonly caused by suspension lifts and worn slip yokes for smoother on-road and off-road performance.\ Ideal for Lifted Jeeps: Corrects driveline angles on lifted applications and allows the use of a double cardan CV driveshaft.\ Heavy-Duty Construction: Manufactured from high-strength materials to withstand off-road abuse and demanding trail conditions.\ Bolt-On Installation: Designed for a straightforward install using factory mounting points with no drilling or cutting required.

Note: For use with NP231 model transfer cases ONLY. Does NOT work with factory driveshafts. An Aftermarket CV driveshaft is required for use. Designed with the most current design shaft found in the New Process Gear NP231. This current design shaft was introduced in 1997. Jeep vehicles using the early NP231 can still use our kit, providing that the needle bearings are removed from the stock drive sprockets.

Installation Time: 3-5 hours

Installation Instructions (PDF)

This double cardan style CV drive shaft is recommended for Jeep TJ Wrangler models equipped with 4in - 6in suspension lifts to prevent driveline vibration and the rear output shaft from breaking.

Features

• Collapsed Measurement: 14.25-inches\ Extended Measurement: 17.75-inches\ After lifting your Jeep TJ Wrangler a CV (Double Cardan) drive shaft is a good choice to eliminate vibration issues and provide the longest lasting drive shaft.\ Includes Brute Force Red seals\ Includes better quality CV joints.\ Shaft strength is twice as strong as the factory equipped drive shaft.\ Running length: 16.5in.

Note: Fits Dana 35 rear axle models with automatic or manual transmission. Fits Dana 44 rear axle models with automatic transmission. A Slip Yoke Eliminator is REQUIRED. Recommended on models with 4in - 6in of lift. Does NOT fit Rubicon models. Does NOT fit Unlimited models. Does NOT fit 97-02 models with 4cyl engine and 3-speed auto transmission. Please use 5074.1_A Does NOT fit 05-06 models with 2.4L 4cyl engine and 6-speed manual transmission. Please use 5074.1_A

Installation Time: 2-3 hours

Installation Instructions (PDF)

This double cardan style CV drive shaft is recommended for Jeep TJ Wrangler models equipped with 4in - 6in suspension lifts or 87-93 Jeep YJ Wrangler models equipped with 4in suspension lifts to prevent driveline vibration and the rear output shaft from breaking.

Features

• Collapsed Measurement: 15.5-inches\ Extended Measurement: 19-inches\ After lifting your Jeep TJ or YJ Wrangler a CV (Double Cardan) drive shaft is a good choice to eliminate vibration issues and provide the longest lasting drive shaft.\ Includes Brute Force Red seals\ Includes better quality CV joints.\ Shaft strength is twice as strong as the factory equipped drive shaft.\

Note: Recommended on TJ models with 4in - 6in of lift. ONLY fits 1997-2002 TJ models with 2.5L 4-cylinder engine and 3-speed automatic transmission. ONLY fits 2005-2006 TJ models with 2.4L 4-cylinder engine and 6-speed manual transmission. Does NOT fit Rubicon models. Recommended on YJ models with 4in of lift. A Slip Yoke Eliminator is REQUIRED.

Installation Time: 2-3 hours

Installation Instructions (PDF)

This double cardan style CV drive shaft is recommended for Jeep TJ Wrangler models equipped with 4in - 6in suspension lifts to prevent driveline vibration and the rear output shaft from breaking.

Features

• Collapsed Measurment: 15.125-inches\ Extended Measurment: 18.625-inches\ After lifting your Jeep TJ Wrangler a CV (Double Cardan) drive shaft is a good choice to eliminate vibration issues and provide the longest lasting drive shaft.\ Includes Brute Force Red seals\ Includes better quality CV joints.\ Shaft strength is twice as strong as the factory equipped drive shaft.\

Note: ONLY fits models with Dana 44 rear axle and manual transmission. A Slip Yoke Eliminator is REQUIRED. Recommended on models with 4in - 6in of lift. Does NOT fit Rubicon models. Does NOT fit Unlimited models. Does NOT fit 00-02 models with 4cyl engine and 3-speed auto transmission. Please use 5074.1_A Does NOT fit 05-06 models with 2.4L 4cyl engine and 6-speed manual transmission. Please use 5074.1_A

Installation Time: 2-3 hours

Installation Instructions (PDF)

Upgrade your worn out rubber brake lines with Rough Country's Stainless Extended Steel Brake Line Kit. Our DOT approved brake line kits offer the necessary extra length to install your application, perfect for anyone who wants to swap out poor performing or decaying factory brake lines.Rough Country's Stainless Steel replacements offer superior protection and a seriously long lifespan. A braided stainless steel exterior keeps your lines free from off-road debris, rocks, and mud that can penetrate factory rubber lines. This durable outer layer also prevents expansion of the internal Teflon layer - even under 4,000PSI - keeping fluid moving to the brake line for a noticeably firmer brake pedal feel. High-quality hollow fasteners at both ends of each brake line provide a leak-free flow path.\ s at both ends of each brake line provide a leak-free flow path.

Features

• Length: 23.25in

Note: ONLY fits models with 4-6in of suspension lift.

Installation Instructions (PDF)

Constructed from 1/4in steel the Rough Country differential guards protect your axles from the hazards that can damage your differential. Made for the Dana 35 axles.

Features

• Easy bolt-on installation\ Protects your differential from off-road hazards.\ Highly durable - constructed from 1/4in steel.

Installation Time: 30 minutes

Installation Instructions (PDF)

Put the shovel to rest with Rough Country's new High Clearance Skid Plate. Made from heavy-duty quarter inch steel, this super tough belly pan protects the underside of your vehicle from off-road hazards. With its innovative design the skid plate sits snug to the vehicle, avoiding hang-ups your factory plate can't and allowing an additional 2in of clearance. The pronounced lip traverses rocks and dirt with ease. A powdercoat helps ward off the elements as well as it gives the vehicle a killer look.

Features

• Easy bolt-on installation.\ Made from heavy-duty 0.25in steel.\ Gain up to 2in of additional clearance.

Note: Non-Rubicon models require a Slip-Yoke Eliminator. Does NOT fit models with 4.0L 6-cylinder engine with an automatic transmission. An extended rear CV Drive Shaft is required. 1.25in Body Lift Kit is required. (#1157) 1in Motor Mount Kit is required. (#1156) Does NOT fit Rubicon models.

Installation Time: 3-4 hours

Installation Instructions (PDF)

Constructed from 1/4in steel the Rough Country differential guards protect your axles from the hazards that can damage your differential. Made for the Dana 30, Dana 35, and Dana 44 axles.

Features

• Easy bolt-on installation\ Protects your differential from off-road hazards.\ Highly durable - constructed from 1/4in steel.

Installation Time: 30 minutes

Installation Instructions (PDF)

Ready to lift your 2012-up Jeep JK? Rough Country's JK Exhaust Extensions are a crucial component to lifting new model Wranglers 2in or more. These easy to install spacers are fitted between the head-pipe and cross-pipe flanges, effectively moving the exhaust rearward toward the crossmember. Standard, there is insufficient room between the front drive shaft and exhaust pipes, leaving an unextended exhaust to make contact with the drive shaft in downward suspension travel. These durable exhaust spacers are made of 2in cold rolled steel exhaust tubing, flared to nest perfectly within the flanges. By extending the cross-pipe, you gain more than twice the clearance in this crucial area allowing for proper installation of any lift of 2in or more. Recommended to use in conjunction with an aftermarket front drive shaft for 4 - 6in kits to maintain optimum clearance and articulation.

Features

• Made of 2in cold rolled steel exhaust tubing.\ Nests perfectly with stock exhaust flanges.\ Gain crucial clearance from the front drive shaft\ for installation of any lift 2in or more.

Note: Recommended on 2012-2018 JK models with 2in or more of suspension.

Installation Time: 1-2 hours

Installation Instructions (PDF)

Sway-bar quick disconnects give your Jeep better articulation off road with the pull of a pin, but allows you to keep on road handling and stability. Our new links fold up and secure out of the way when not in use.

Features

• Easy bolt-on installation\ Easily secured away when not in use.\ Allows for greater articulation off-road.\ Quick pull of the pin and you're trail ready.

Note: ONLY fits models with 2.5in of suspension lift.

Installation Time: 1-2 hours

Installation Instructions (PDF)

DonΓÇÖt hit the road without a full-size spare! Rough CountryΓÇÖs Rear Tire Carrier Spacer gives your Jeep Wrangler the ability to carry a larger aftermarket tire and wheel on the rear of your vehicle. This easy-to-install design fits any tire/wheel combo up to 33-inches, allowing you to always have a full size spare at your disposal.This durable spacer features 1/4-inch plate steel construction, laser cut and robot welded for a precise fit and unyielding quality. This spacer is easy to install, featuring a 100% bolt-on installation procedure that can have your 5th wheel up and running in no-time flat!This unique Tire Carrier Spacer works with both 5x5 and 5x4.5 bolt patterns, suitable for Jeep JK, TJ, and YJ. It also works with Rough CountryΓÇÖs TJ/JK Wheel Adapters for even more functionality. Includes Rough CountryΓÇÖs lifetime replacement guarantee.

Features

• Easy bolt-on installation\ Gives the ability to carry up to a 33in spare tire.

Installation Time: 30 min

Installation Instructions (PDF)

This system allows for relocating your front spring shackles to the rear mount for an improved, more stable ride with less rebound in the front end. No welding is required. This kit will work for lifted or factory height vehicles, and gives about 1/2in of lift.

Features

• Easy bolt-on installation.\ Improved, more stable ride quality.

Note: Gives about 1/2in of suspension lift.

Installation Time: 3-4 hours

Installation Instructions (PDF)

This system allows for relocating your front spring shackles to the rear mount for an improved, more stable ride with less rebound in the front end. No welding is required. This kit will work for lifted or factory height vehicles, and gives about 1/2in of lift.

Features

• Easy bolt-on installation.\ Improved, more stable ride quality.

Note: For use with factory shackles ONLY. Gives about 1/2in of suspension lift. Designed to work with Rough Country or OEM factory springs.

Installation Time: 3-4 hours

Installation Instructions (PDF)

Constructed from 1/4in steel the Rough Country differential guards protect your axles from the hazards that can damage your differential. Made for the Dana 44 axles.

Features

• Easy bolt-on installation\ Protects your differential from off-road hazards.\ Highly durable - constructed from 1/4in steel.

Note: Does NOT fit 07-15 Jeep JK Wrangler front Dana 44 axles. Please use # 1045.

Installation Time: 30 minutes

Installation Instructions (PDF)

Sway-bar quick disconnects give your Jeep better articulation off road with the pull of a pin, but allows you to keep on road handling and stability. Our new links fold up and secure out of the way when not in use.

Features

• Easy bolt-on installation\ Easily secured away when not in use.\ Allows for greater articulation off-road.\ Quick pull of the pin and you're trail ready.

Note: ONLY fits models with 3.5in - 6in of suspension lift.

Installation Time: 1-2 hours

Installation Instructions (PDF)

This double cardan style CV drive shaft is recommended for 87-93 Jeep YJ Wrangler models equipped with 6in suspension lifts to prevent driveline vibration and the rear output shaft from breaking.

Features

• Collapsed Measurement: 17.375-inches\ Extended Measurement: 20.875-inches\ After lifting your Jeep YJ Wrangler a CV (Double Cardan) drive shaft is a good choice to eliminate vibration issues and provide the longest lasting drive shaft.\ Includes better quality CV joints.\ Shaft strength is twice as strong as the factory equipped drive shaft.\

Note: A Slip Yoke Eliminator is REQUIRED. Recommended on YJ models with 6in of lift.

Installation Time: 2-3 hours

Installation Instructions (PDF)

Our lift shackles are constructed of 3/8in thick steel. All corners are rounded to avoid interference problems. New grade 8 hardware is included with each shackle lift, along with detailed instructions. Sold in Pairs.

Features

• Easy bolt-on installation.\ Increased ground clearance.\ Allows springs more movement and articulation.\ Features rounded corners to avoid interference problems.\ Gain 1in front or rear lift on Jeep YJ models.\ Gain 1 3/8in rear lift on Jeep CJ models.

Note: Sold in pairs. Works for front or rear lift on Jeep YJ models. Works for rear lift on Jeep CJ models.

Installation Time: 2-3 hours

Installation Instructions (PDF)

After lifting a Jeep JK, the rear axle can pull slightly to the passenger side of the Jeep. With Rough Country's rear track bar bracket this is an issue of the past! Rough Country's rear track bar bracket helps restore your Wranglers rear axle postion by offerering three different attachment holes for various heights ranging from 2.5-6 inches of suspension lift. This heavy duty bracket is constructed of 1/4 thick steel to face the trails ahead.

Features

• Easy bolt-on installation.\ Helps to perfectly center your Jeep's rear axle.

Note: ONLY fits models with 2.5in - 6in of suspension lift.

Installation Time: 1 hours

Installation Instructions (PDF)

Note: For use with the rear upper control arms ONLY.

Installation Time: 1 hours

Installation Instructions (PDF)

This kit raises your front seats 1.25in, allowing you to see better over the dashboard and improving overall visibility both on and off road!

Features

• Easy bolt-on installation.\ Improves visibility.\ Spacers are made from fiberglass reinforced nylon for strength and durability.

Installation Time: .5 hours

Installation Instructions (PDF)

A must for anyone using larger than stock tires. This strong, rigid design installs in minutes with simple hand tools.

Features

• Easy bolt-on installation.

Installation Time: .5 hours

Installation Instructions (PDF)

Sway-bar quick disconnects give your Jeep better articulation off road with the pull of a pin, but allows you to keep on road handling and stability. Our new links fold up and secure out of the way when not in use.

Features

• Easy bolt-on installation\ Easily secured away when not in use.\ Allows for greater articulation off-road.\ Quick pull of the pin and you're trail ready.

Note: ONLY fits models with 2.5in of suspension lift.

Installation Time: 1-2 hours

Installation Instructions (PDF)

A must for anyone using larger than stock tires. This strong, rigid design installs in minutes with simple hand tools.

Features

• Easy bolt-on installation.

Note: Requires minor drilling.

Installation Time: .5 hours

Installation Instructions (PDF)

When you're out there rock crawling, you should be focused on "Where can I go?" not "How will I get home." Gain peace of mind and quit worrying about that puny OEM Tie Rod. Rough Country's Jeep TJ / XJ Tie Rod Upgrade Kit gives you the type of heavy duty protection to keep things moving in the roughest conditions. This Tie Rod Upgrade with HD 1.25in DOM Tubing won't bend or snap under full flex at slow speeds, and is adequately equipped to handle the increased leverage of larger tires and 4wd in full turns.

Features

• Easy bolt-on installation.\ Built from Heavy Duty 1.25in OD DOM tubing.\ Uses stock tie rod ends.\ Equipped to handle the increased leverage of larger tires.

Installation Time: 1-2 hours

Installation Instructions (PDF)